مهندسی متالورژی

مهندسی متالورژی

پوشش‌های تانتالم لایه‌نشانی شده بر روی آلیاژ نیکل-تیتانیم به روش کندوپاش مغناطیسی: نقش ولتاژ بایاس منفی زیرلایه

نوع مقاله : مقاله پژوهشی

نویسندگان
دانشگاه صنعتی سهند تبریز
10.22076/me.2026.746854
چکیده
در این پژوهش، از روش کندوپاش مغناطیسی برای لایه‌نشانی پوشش‌های تانتالم بر روی آلیاژ نیکل-تیتانیم استفاده شده است. لایه‌نشانی پوشش‌های تانتالم در دو حالت بدون اعمال ولتاژ بایاس و با اعمال ولتاژ بایاس V 75- انجام شده است. هدف اصلی، بررسی تاثیر اعمال ولتاژ بایاس منفی زیرلایه بر خواص مورفولوژیکی و ریزساختار پوشش‌های لایه‌نشانی شده است. از مطالعات FESEM/EDS و GI-XRD به ترتیب برای بررسی مورفولوژی و ریزساختار پوشش استفاده شده است. بررسی‌های FESEM نشان داده است که پوشش لایه‌نشانی شده در حالت بدون بایاس ریزساختار یکنواخت‌تر و متراکم‌تری دارد، در حالی که ترک‌ها و ذرات گرد مانندی در سطح پوشش‌ لایه‌نشانی شده در بایاس V 75- ظاهر شده است. الگوهای GI-XRD نشان می‌دهد که لایه‌نشانی در دمای اتاق به تشکیل ساختار آمورف منجر شده است، با این حال یک پیک از فاز Ta2O با ساختار مکعبی در نمونه‌ی بدون بایاس در زاویه‌ی حدود ˚94/46 ظاهر شده است.
کلیدواژه‌ها

[1]      M. Badr, A. Mohammadzadeh, J. Khalil-Allafi, M. Khoshghadam-Pireyousefan, and A. Mostafaei, “In-situ formation of TiN-TiO2 composite layer on NiTi shape memory alloy via fluidized bed reactor,” Ceram. Int., vol. 46, no. 13, pp. 21097–21106, 2020.
[2]      M. Soltanalipour, J. Khalil-Allafi, E. Ghareshabani, and V. Khalili, “Electrochemical behaviour of NiTi alloy coated with TiN using DPF,” Surf. Eng., vol. 33, no. 0, pp. 1–8, 2017.
[3]      K. McNamara, S. Beloshapkin, K. M. Hossain, M. S. Dhoubhadel, and S. A. M. Tofail, “Tantalum coating inhibits Ni-migration from titanium out-diffusion in NiTi shape memory biomedical alloy,” Appl. Surf. Sci., vol. 535, no. February 2020, 2021.
[4]      M. Z. Ibrahim, A. A. D. Sarhan, F. Yusuf, and M. Hamdi, “Biomedical materials and techniques to improve the tribological , mechanical and biomedical properties of orthopedic implants e A review article,” J. Alloys Compd., vol. 714, pp. 636–667, 2017.
[5]      Y. Zhou, M. Li, Y. Cheng, Y. F. Zheng, T. F. Xi, and S. C. Wei, “Tantalum coated NiTi alloy by PIIID for biomedical application,” Surf. Coatings Technol., vol. 228, no. SUPPL.1, pp. 2–6, 2013.
[6]      M. Soltanalipour, J. Khalil-Allafi, and A. Motallebzadeh, “Influence of sputtering atmosphere on the structural, biological, and electrochemical properties of tantalum-containing coatings on the NiTi alloy,” Surf. Coatings Technol., vol. 481, no. March, p. 130675, 2024.
[7]      J. Khalil-Allafi, H. Daneshvar, M. S. Safavi, and V. Khalili, “A survey on crystallization kinetic behavior of direct current magnetron sputter deposited NiTi thin films,” Phys. B Condens. Matter, vol. 615, no. April, 2021.
[8]      M. S. Safavi, M. A. Surmeneva, R. A. Surmenev, and J. Khalil-Allafi, “RF-magnetron sputter deposited hydroxyapatite-based composite & multilayer coatings: A systematic review from mechanical, corrosion, and biological points of view,” Ceram. Int., vol. 47, no. 3, pp. 3031–3053, 2021.
[9]      J. Z. Shi, C. Z. Chen, H. J. Yu, and S. J. Zhang, “The effect of process conditions on the properties of bioactive films prepared by magnetron sputtering,” Vacuum, vol. 83, pp. 249–256, 2009.
[10]    S. C. Velasco, A. Cavaleiro, and S. Carvalho, “Functional properties of ceramic-Ag nanocomposite coatings produced by magnetron sputtering,” Prog. Mater. Sci., vol. 84, pp. 158–191, 2016.
[11]    O. K. Alexeeva and V. N. Fateev, “Application of the magnetron sputtering for nanostructured electrocatalysts synthesis *,” Int. J. Hydrogen Energy, vol. 41, no. 5, pp. 3373–3386, 2016.
[12]    X. Chen, R. Bai, and M. Huang, “Optical properties of amorphous Ta2O5 thin films deposited by RF magnetron sputtering,” Opt. Mater. (Amst)., vol. 97, no. September, 2019.
[13]    N. I. Baklanova, V. V Lozanov, and A. T. Titov, “The first evidence of the high oxidation resistance of the novel ternary tantalum-iridium-boron phase,” Corros. Sci., vol. 160, no. August, p. 108178, 2019.

مقالات آماده انتشار، پذیرفته شده
انتشار آنلاین از 29 آبان 1405