مهندسی متالورژی

مهندسی متالورژی

استخراج وانادیوم از کنسانتره تیتانومگنتیت کهنوج با روش Electrokinetics

نوع مقاله : مقاله پژوهشی

نویسندگان
1 دانشگاه صنعتی همدان
2 گروه مهندسی مواد، دانشگاه صنعتی همدان، همدان
10.22076/me.2026.746853
چکیده
در این پژوهش، استخراج وانادیوم از کنسانتره تیتانومگنتیت کهنوج با استفاده از روش الکتروکینتیک در یک محفظه بستر ثابت انجام شد. به‌منظور افزایش راندمان، نمونه‌ها تحت عملیات تشویه در دمای 900 درجه سانتی‌گراد با کربنات سدیم قرار گرفتند که موجب افزایش چشمگیر بازیابی وانادیوم شد. در این تحقیق، اثر زمان آسیاکاری پودر، اثر تشویه کنسانتره، اثر دمای سلول الکتروکینتیک و تغییر pH محلول بر استخراج یون‌های وانادیوم از کنسانتره تیتانومگنتیت مورد بررسی قرار گرفت. نتایج نشان داد که شرایط بهینه برای استخراج حداکثری وانادیوم شامل تشویه کنسانتره با 22 درصد کربنات سدیم در دمای 900 درجه سانتی‌گراد، دمای سلول واکنش 60 درجه سانتی‌گراد، افزودن 5/1 درصد سدیم دودسیل سولفات به عنوان سورفکتانت و آسیاکاری به مدت 2 ساعت است. تعیین غلظت وانادیوم با استفاده از طیف‌سنجی جذب اتمی انجام شد که بیشترین درصد بازیابی وانادیوم 8/56 درصد بدست آمد. درمجموع، یافته‌ها نشان می‌دهد که ترکیب عملیات تشویه با کربنات سدیم و آسیاکاری منجر به ارتقای قابل‌توجه راندمان و کاهش هزینه‌های فرآیند استخراج وانادیوم از کنسانتره‌های تیتانومگنتیت به روش الکتروکینتیک می ‌شود.
کلیدواژه‌ها

عنوان مقاله English

Extraction of Vanadium from Kahnouj Titanomagnetite Concentrate Using the Electrokinetics Process

نویسندگان English

Saeed Nemati 1
Mehdi Pourabdoli 2
Ahmad Ghadiri Hamidi 1
Atieh Sarmadi 1
Vahid A. Lashghari 1
1 Hamedan University of Technology
2 Department of Materials Eng., Hamadan University of Technology, Hamdan, Iran.
چکیده English

In this study, the extraction of vanadium from Kahnouj titanomagnetite concentrate was investigated using an electrokinetics process in a fixed-bed compartment. To enhance the extraction efficiency, the samples were subjected to roasting with sodium carbonate at 900 °C, which significantly increased the vanadium recovery. In this research, the effects of powder milling time, concentrate roasting, the temperature of the electrokinetics cell, and the variation of solution pH on the extraction of vanadium ions from the titanomagnetite concentrate were evaluated. The results indicated that the optimum conditions for maximum vanadium extraction include roasting the concentrate with 22 wt.% sodium carbonate at 900 °C, a reaction cell temperature of 60 °C, the addition of 1.5 wt.% sodium dodecyl sulfate (SDS) as a surfactant, and a milling time of 2 hours. The concentration of vanadium was determined using atomic absorption spectroscopy, achieving a maximum vanadium recovery of 56.8%. Overall, the findings demonstrate that combining sodium carbonate roasting with mechanical milling substantially improves the efficiency and reduces the costs of vanadium extraction from titanomagnetite concentrates via the electrokinetics process.

کلیدواژه‌ها English

Vanadium extraction
Titanomagnetite concentrate
Soda roasting
Electrokinetics process
Mechanical milling
1- Rorie Gilligan, Aleksandar N. Nikoloski, The extraction of vanadium from titanomagnetites and other sources, Minerals Engineering, Volume 146, 2020, 106106, ISSN 0892-6875, https://doi.org/10.1016/j.mineng.2019.106106., 2020.
2- Nasimifar A., Mehrabani J. Vazife. A review on the extraction of vanadium pentoxide from primary, secondary, and co-product sources. Int J Min Geo Eng. 2022;56(4):361–382. doi: 10.22059/ijmge.2022.319012.594893.
3- Habashi, F. Pollution problems in the metallurgical industry: A review. Journal of Mining and Environment, 2012; 2(1): 17-26. doi: 10.22044/jme.2012.16.

4- Alexandra B. Ribeiro, Majeti Narasimha Vara Prasad, Electrokinetic Remediation for Environmental Security and Sustainability, John Wiley & Sons, Ltd, 2021.

5- Ali Barati Fardin, Ahmad Jamshidi-Zanjani, A critical review on soil remediation using electrokinetic-enhanced permeable reactive barriers: Challenges and enhancements, Chemical Engineering Journal Advances, Volume 23, 2025, 100774, ISSN 2666-8211, https://doi.org/10.1016/j.ceja.2025.100774.
6- Maria Kokko, Mikael Manninen, Tao Hu, Ulla Lassi, Tuomas Vielma, Janne Pesonen, Hydrometallurgical recovery of vanadium and calcium from electric arc furnace slag in hydrogen based steelmaking, Minerals Engineering, Volume 217, 2024, 108966, ISSN 0892-6875,https://doi.org/10.1016/j.mineng.2024.108966.
7-  Li R, Liu T, Zhang Y, Huang J, Xu C. Efficient Extraction of Vanadium from Vanadium–Titanium Magnetite Concentrate by Potassium Salt Roasting Additives. Minerals, 2018; 8(1):25. https://doi.org/10.3390/min8010025.
8- Yi Luo, Xiaokui Che, Haixia Wang, Qi Zheng, Lei Wang, Selective extraction of vanadium from vanadium-titanium magnetite concentrates by non-salt roasting of pellets-H2SO4 leaching process, Physicochemical Problems of Mineral Processing, 57(4), 2021, 36-47.
9- C. K. Gupta, N. Krishnamurthy, Extractive Metallurgy of Vanadium, Elsevier Science, 1992.
10- Hasanvand A., Pourabdoli M., Ghaderi Hamidi A. Thermochemical Heat Storage Properties of Co3O4-X wt % Al2O3 and Co3O4-X wt % Y2O3 Composites (X=1, 2, 5, 8, 10). Journal of Renewable Energy and Environment. 2019;6(4):27–34. doi: 10.30501/jree.2019.102483.
11- زهرا حسینی، مطالعه احیا کربوترمی کنسانتره تیتانومگنتیت کهنوج در حالت جامد و استحصال V2O5 از آن، پایان نامه کارشناسی ارشد، دانشگاه صنعتی همدان، 1401.

مقالات آماده انتشار، پذیرفته شده
انتشار آنلاین از 29 آبان 1405