مهندسی متالورژی

مهندسی متالورژی

ارزیابی تطبیقی جوشکاری لیزری ضربانی فولاد زنگ‌نزن

نویسندگان
دانشگاه تهران
10.22076/me.2026.746852
چکیده
در پژوهش حاضر، جوشکاری لیزری ضربانی Nd:YAG روی ورق فولاد زنگ‌نزن AISI 316L به ضخامت ۱ میلی‌متر صورت پذیرفت و پاسخ حرارتی، هندسه ناحیه ذوب و میدان تنش پسماند آن با دو کد اجزای محدود سیسولد و آباکوس شبیه‌سازی گردید. در هر دو محیط عددی، ورودی حرارتی با مدل حجمی سه‌بعدی بیضی دوگانه گلداک تعریف شد و در کنار آن، راه‌حل تحلیلی منبع نقطه‌ای متحرک سه‌بعدی روزنتال به‌مثابه معیار مرجع فیزیکی برای غربالگری سریع پارامترهای فرآیند به کار گرفته شد. راه‌حل روزنتال نیم‌عرض ناحیه ذوب را با دقتی چشمگیر برآورد کرد (۴۷۷٫۷ میکرومتر در برابر ۴۹۰ میکرومتر تجربی؛ خطای ۲٫۵۱-) و از این حیث هم بر سیسولد (خطای ۴٫۹۰-) و هم بر آباکوس (خطای ۲۱٫۸۴-) پیشی گرفت؛ حال آنکه به سبب ماهیت منبع نقطه‌ای و نادیده‌انگاشتن تشکیل حفره کلیدی، در پیش‌بینی عمق نفوذ محدودیت آشکاری از خود نشان داد (خطای ۴۰٫۷-). مقایسه تاریخچه‌های حرارتی نشان داد سیسولد قله‌های دمایی بالاتر و نرخ سرمایش آهسته‌تری تولید می‌کند، در حالی که آباکوس به دلیل بهره‌گیری از حل‌گر عمومی حرارتی، قله دمایی پایین‌تر و افت سریع‌تر دما ارائه داد. در بررسی تنش پسماند، سیسولد قله کششی ۱۷۳ مگاپاسکال را پیش‌بینی کرد، در حالی که آباکوس قله‌های فشاری بسیار بزرگ‌تری تا ۲۳۰- مگاپاسکال ثبت نمود. یافته‌های این مطالعه نشان می‌دهد رویکرد هم‌افزای به‌کارگیری حل تحلیلی روزنتال برای برآورد سریع پارامترها و صحت‌سنجی معقول نتایج، و سپس توسل به شبیه‌سازی اجزای محدود پیشرفته برای پیش‌بینی دقیق عمق نفوذ و میدان تنش پسماند، راهبردی کارآمد و کم‌هزینه برای تحلیل جوشکاری لیزری به شمار می‌رود.
کلیدواژه‌ها

1.        Klimpel A. Review and Analysis of Modern Laser Beam Welding Processes. Vol. 17, Materials. Multidisciplinary Digital Publishing Institute (MDPI); 2024.
2.        Hadavi M, Rostami H, Nickabadi S, Rostami E, Moradalian H. Investigation of laser factors influence on strength of laser spot welding of 316 stainless steel using the designing experiments method. Vol. 15, Scientific Reports. Nature Research; 2025.
3.        Kuryntsev S. A review: Laser welding of dissimilar materials (Al/Fe, Al/Ti, Al/Cu)—methods and techniques, microstructure and properties. Vol. 15, Materials. MDPI; 2022.
4.        Ramaphoko NA, Skhosane S, Maledi N. Microstructural Characterization and Mechanical Properties of Laser Beam-Welded Dissimilar Joints between A6000 Aluminum Alloy and Galvanized Steel. Materials. 2022 Jan 1;15(2).
5.        Alhajhamoud M, Ozbey S, Ilgaz MA, Candan L, Cinar I, Vukotić M, et al. Laser Welding of Ti6Al4V Titanium Alloy in Air and a Water Medium. Materials. 2022 Dec 1;15(24).
6.        Wen B, Shen L, Kang X. Laser Welding of Micro-Wire Stent Electrode as a Minimally Invasive Endovascular Neural Interface. Micromachines (Basel). 2025 Jan 1;16(1).
7.        Han YH, Lim HB, Shin TS, Yang HI. Prediction of Welding Deformation Using the Thermal Elastic–Plastic Finite Element Method by Considering Welding Interpass Temperature. Materials. 2024 Aug 1;17(15).
8.        Kik T. Heat source models in numerical simulations of laser welding. Materials. 2020 Jun 1;13(11).
9.        Rohani Raftar H, Khodabakhshi A, Suikkari T, Ahola A, Skriko T. Multi-objective optimization of welding-induced residual stress and deflection in 6082-T6 aluminum alloy using validated thermo-mechanical modeling. Journal of Advanced Joining Processes. 2025 Dec 1;12.
10.      Singh UP, Swaminathan S, Phanikumar G. Thermo-mechanical approach to study the residual stress evolution in part-scale component during laser additive manufacturing of alloy 718. Mater Des. 2022 Oct 1;222.
11.      Morawiec M, Kik T, Stano S, Różański M, Grajcar A. Numerical Simulation and Experimental Analysis of Thermal Cycles and Phase Transformation Behavior of Laser-Welded Advanced Multiphase Steel. Symmetry (Basel). 2022 Mar 1;14(3).
12.      Wen P, Wang J, Jiao Z, Fu K, Li L, Guo J. Numerical Simulation of Temperature Evolution, Solid Phase Transformation, and Residual Stress Distribution during Multi-Pass Welding Process of EH36 Marine Steel. Metals (Basel). 2024 Apr 1;14(4).
13.      Giudice F, Sili A. Validation of a Theoretical Model for Laser Welding Thermal Field by Multi-Physics Numerical Simulation. Metals (Basel). 2023 Dec 1;13(12).
14.      Liu S, Wu Z, Zhou W, Zhou H, Zhang K, Yin D, et al. A review of welding simulation methods for large components. Vol. 33, Progress in Natural Science: Materials International. Chinese Materials Research Society; 2023. p. 551–68.
15.      Ghazali SNM, Ibrahim MHI, Manurung YHP, Adenan MS, Rahman ARA, Ramlan AR, et al. A focused review on numerical computation in wire arc additive manufacturing for high strength low alloy steels: past insights and potential opportunities. International Journal of Advanced Manufacturing Technology. 2025 Nov 1;
16.      Ramos HME, Tavares SMO, de Castro PMST. Numerical modelling of welded T-joint configurations using SYSWELD. Science and Technology of Materials. 2018 Dec 1;30:6–15.
17.      Ahmad AS, Wu Y, Gong H, Nie L. Finite element prediction of residual stress and deformation induced by double-pass TIG welding of Al 2219 plate. Materials. 2019 Jul 1;12(14).
18.      Krishna Murthy KR, Akyel F, Reisgen U, Olschok S. Simulation of transient heat transfer and phase transformation in laser beam welding for low alloy steel and studying its influences on the welding residual stresses. Journal of Advanced Joining Processes. 2022 Jun 1;5.
19.      Caruso S, Umbrello D. Numerical and experimental validation of gas metal arc welding on AISI 441 ferritic stainless steel through mechanical and microstructural analysis. International Journal of Advanced Manufacturing Technology. 2022 Jun 1;120(11–12):7433–44.
20.      Author C, Asm Z, Hanim A. The Effect of Welding Process Parameter on Temperature and Residual Stress in Butt-Joint Weld of Robotic Gas Metal Arc Welding. Aust J Basic Appl Sci. 2013;7(7):814–20.
 
[21] Rosenthal, D. (1946). The theory of moving sources of heat and its application to metal treatments. Transactions of the ASME, 68(8), 849-866.
[22] Christensen, N., Davies, V. de L., & Gjermundsen, K. (1965). Distribution of temperatures in arc welding. British Welding Journal, 12(2), 54-75.
[23] Eagar, T. W., & Tsai, N. S. (1983). Temperature fields produced by traveling distributed heat sources. Welding Journal, 62(12), 346s-355s.
[24] Steen, W. M., & Mazumder, J. (2010). Laser Material Processing (4th ed.). Springer-Verlag, London.
[25] Akbari, M., Saedodin, S., Toghraie, D., Shojaeian, M., & Sharifpour, F. (2014). Experimental and numerical investigation of temperature distribution and melt pool geometry in pulsed Nd:YAG laser welding 304 stainless steel. Optics & Laser Technology, 59, 52-59.

مقالات آماده انتشار، پذیرفته شده
انتشار آنلاین از 29 آبان 1405