مهندسی متالورژی

مهندسی متالورژی

تاثیر فشار هیدرواستاتیک در فرآیند پیچش تحت فشار بالا بر دمای استحاله آلیاژ حافظه‌دار Cu-12Al-4Ni

نوع مقاله : مقاله پژوهشی

نویسندگان
1 دانشگاه صنعتی امیرکبیر
2 دانشکده مهندسی مواد و متالورژی دانشگاه صنعتی امیرکبیر
10.22076/me.2026.746851
چکیده
آلیاژهای حافظه‌دار به‌دلیل توانایی بازگشت به شکل اولیه تحت اثر حرارت و استحاله مارتنزیت-آستنیت، در صنایع پیشرفته اهمیت زیادی دارند. در این پژوهش، پودر آلیاژ Cu-12Al-4Ni با آلیاژسازی مکانیکی تولید و سپس به صورت قرص‌های ۱۰×۳ میلی‌متری تحت فرآیند تغییرشکل شدید پلاستیک به روش پیچش تحت فشار بالا (HPT) قرار گرفت. پس از تف‌جوشی نمونه‌ها در ℃500، آزمون DSC انجام شد. نتایج نشان داد اعمال پیچش در فشار GPa۲ دمای پایان استحاله آستنیتی را از ℃۲۶۲.۵ (در حالت فشار ساده) به ℃۲۹۲ افزایش می‌دهد. همچنین افزایش فشار HPT از ۲ به GPa۴ این دما را تا ℃۳۱۲ بالا می‌برد. این تغییرات ناشی از ریزدانه‌سازی و کاهش تخلخل در اثر HPT و تشدید آن با فشار بیشتر است که پایداری مارتنزیت را افزایش می‌دهد. مشاهدات متالوگرافی کاهش حدود 18% تخلخل را تأیید کرد و آزمون میکروسختی نیز افزایش سختی از ۴۰۵ به ۴۲۳ ویکرز را با افزایش فشار نشان داد.
کلیدواژه‌ها

[1]         D. C. Lagoudas, Shape Memory Alloys: Modeling and Engineering Applications. New York: Springer, 2008.
[2]         K. Otsuka and C. M. Wayman, Shape Memory Materials. s.l.: Cambridge University Press, 1998.
[3]         M. Rezaei, M. R. Aboutalebi, and A. Shokuhfar, “Effect of Mechanical Alloying and Heat Treatment on Shape Memory Behavior of Cu–Al–Ni Alloys,” 2021.
[4]         N. Z. ; et al. Ahamed R.; Khan, “A comparative study on force deformation behaviour of Fe and Cu-based SMA with NiTi SMA,” Materials Science Forum, pp. 41–46, 2023.
[5]         S. Saburi T.; Nenno, “Effects of hydrostatic pressure on martensitic transformations in shape memory alloys,” in Proceedings of the International Conference on Solid–Solid Phase Transformations, 1982, pp. 1455–1460.
[6]         A. J. ; et al. Pérez-Sierra, “Transformation volume effects on Cu-Al-Ni shape memory alloys under high pressure,” Metals (Basel), pp. 237–252, 2013.
[7]         Z. ; et al. Li, “Hydrostatic pressure effects on martensitic transformations in Cu-based shape memory alloys,” J Alloys Compd, pp. 7032–7037, 2011.
[8]         X. ; et al. Zhao, “Unraveling factors affecting the reversibility of martensitic phase transformations,” Acta Mater, 2024.
[9]         Y. Chen Y.; Liu, “Influence of severe shear deformation on martensitic transformations in Cu-based shape memory alloys,” Materials, 2019.
[10]       M. ; et al. Zhou, “The Microstructure Evolution and Dynamic Recrystallization Mechanism of Cu–Ni–Co–Si–Cr Alloys during High-Temperature Deformation,” Coatings, p. 660, 2023.
[11]       P. ; et al. Zhang, “Effect of Sintering Temperature on the Microstructure and Properties of High-Strength and Highly Conductive 5 wt.% ZrB2/Cu Composite,” Powder Metallurgy and Metal Ceramics, pp. 560–573, 2023.
[12]       T. G. Zhilyaev A. P.; Langdon, “Using high-pressure torsion for metal processing: Fundamentals and applications,” Prog Mater Sci, pp. 893–979, 2008.
[13]       A. A. ; A. R. S. Mohammed S. S.; Al-Attar, “The effect of heat treatment on crystal structure and thermodynamic properties of Cu–Al–Ni shape memory alloy,” J Therm Anal Calorim, pp. 3297–3304, 2025.
[14]       R. M. German, Powder Metallurgy and Particulate Materials Processing. unknown: MPIF, 2005.
[15]       L. ; et al. Delaey, “Influence of internal defects on martensitic transformations in Cu-based shape memory alloys,” Acta Metallurgica, pp. 1393–1402, 1984.
[16]       E. O. Hall, “The deformation and ageing of mild steel: III discussion of results,” Proceedings of the Physical Society, pp. 747–753, 1951.
[17]       N. J. Petch, “The cleavage strength of polycrystals,” Journal of the Iron and Steel Institute, pp. 25–28, 1953.
 

مقالات آماده انتشار، پذیرفته شده
انتشار آنلاین از 29 آبان 1405