مهندسی متالورژی

مهندسی متالورژی

بررسی مشخصات و خواص پوشش‌های کامپوزیتی نایوبیم/کروم تشکیل‌شده در محیط پودر فشرده به روش نفوذ واکنشی حرارتی (TRD) روی فولاد ابزار 1/1545

نوع مقاله : مقاله پژوهشی

نویسندگان
1 دانشگاه مشهد
2 استاد دانشگاه فردوسی مشهد-دانشکده مهندسی- گروه آموزشی مهندسی متالورژی و مواد
3 دانشگاه فردوسی مشهد
10.22076/me.2026.746850
چکیده
پوشش‌های سخت به‌طور گسترده برای بهبود خواص سطحی و افزایش مقاومت به سایش قطعات فولادی به کار می‌روند. در این پژوهش، پوشش‌های کاربیدی بر روی فولاد ابزار 1545 با استفاده از فرآیند نفوذ واکنشی حرارتی (TRD) در محیط پودر فشرده ایجاد شد. عملیات در دمای C° 1000 به مدت 9 ساعت و با ترکیب‌های مختلفی از فروکروم و فرونایوبیم انجام گردید. ریزساختار و ترکیب پوشش‌ها به کمک SEM و EDS بررسی شدند. نتایج نشان داد نمونه حاوی 60%Nb بیشترین ضخامت پوشش (حدود 26 میکرومتر) را تشکیل داده است، در حالی‌که نمونه 30%Nb-30%Cr نازک‌ترین لایه (حدود 15 میکرومتر) را ایجاد کرد. آزمون سایش نیز نشان داد نمونه 60%Nb کمترین ضریب اصطکاک (4/0-35/0) و نمونه 30%Nb-30%Cr بیشترین مقدار (6/0-55/0) را دارا است. مجموع نتایج بیانگر آن است که افزایش درصد نایوبیم باعث تشکیل لایه‌های کاربیدی ضخیم‌تر و عملکرد سایشی مطلوب‌تر می‌شود.
کلیدواژه‌ها

1- محمدرضا نجاری سعادت آبادی، سید عبدالکریم سجادی، رضا ابراهیمی، امید گنجی، «تشکیل کاربید کروم روی فولاد ابزار 1545 با استفاده از فرایند نفوذ واکنشی حرارتی (TRD) در شرایط مختلف و بررسی مشخصات آن»، دهمین کنفرانس بین المللی مهندسی مواد و متالورژی ایران، آبان ماه 1400.
2- C. Cosenza, L. Fratini, A. Pasta, F. Micari, “Damage and fracture study of cold extrusion dies”, Engineering Fracture Mechanics, May 2004, 1021–1033.
3- Eric J. Mittemeijer and Marcel A. J. Somers, “Thermochemical Surface Engineering of Steels: Improving Materials Performance”, Metals and Surface Engineering, 2015, 62. 792.
4- M. Geiger and B. Falk, “Prediction of service life and failure probability of cold forging tools”, CIRP Annal, 2001, 173–176.
5- Ali. Günen and Hasan. Hüseyin Açıkgöz, “Niobium Carbide Coatings Grown on Cold Work Tool Steel AISI D3 by Thermomechanical Processing”, Protection of Metals and Physical Chemistry of Surfaces, 2023, Vol. 59, No. 4, pp. 648–670. 
6- M. Azizi and M. Soltanieh, “FORMATION OF NIOBIUM CARBIDE COATING ON AISI L2 STEEL USING THERMO-REACTIVE DIFFUSION (TRD) TECHNIQUE”, February 2010, Vol. 23, No. 1, pp. 77-85.
7- Husen. Haekal, “The Effect of the Holding Time on the Formation of Niobium-Vanadium Carbide Coating onto AISI 420 by Thermo-Reactive Diffusion Process”, JURNAL TEKNIK ITS, 2020, Vol. 9, No. 2, pp. 2337-3539.
8- U. Sen, S.S. Pazarlıoglu, S. Sen, “Niobium boride coating on AISI M2 steel by boro-niobizing treatment”, Materials Letters, June 2008, 2444-2446.
9- M. Miyake, Y. Hirooka, R. Imoto, T. Sano, “Chemical vapor deposition of niobium on graphite”, Thin Solid Films, November 1979, 303-308.
10- K. Zhang, M. Wen, G. Cheng, X. Li, Q.N. Meng, J.S. Lian, “Reactive magnetron sputtering deposition and characterization of niobium carbide films”, Vacuum, January 2014, 233-241.
11- Y. Cao, H. Ren, C. Hu, Q. Meng, Q. Liu, “In-situ formation behavior of NbC reinforced Fe-based laser cladding coatings”, Materials Letters, May 2015, 61-63.
12- X. Cai, Y. Xu, L. Zhong, N. Zhao, Y. Yan, “Kinetics of niobium carbide reinforced composite coating produced in situ”, Vacuum, September 2015, 239-244.
13- X.S. Fan, Z.G. Yang, C. Zhang, Y.D. Zhang, H.Q. Che, “Evaluation of vanadium carbide coatings on AISI H13 obtained by thermo-reactive deposition/diffusion technique”, Surface and Coatings Technology, October 2010, 641-646.
14- Reza. Soltani and Mahmoud. Heydarzadeh Sohi, “Evaluation of niobium carbide coatings produced on AISI L2 steel via thermo-reactive diffusion technique”, Vacuum, December 2017, 44-51.
15- Ugur. Sen, “Kinetics of niobium carbide coating produced on AISI 1040 steel by thermo-reactive deposition technique”, Materials Chemistry and Physics, July 2004, 189–194.
16- T. Arai, H. Fujita, Y. Sugimoto, Y. Ohta, “Diffusion carbide coatings formed in molten borax systems”, Journal of Materials Engineering, June 1987, 183-189.
17- C.K.N. Oliveira, C.L. Benassi, L.C. Casteletti, “Evaluation of hard coatings obtained on AISI D2 steel by thermo-reactive deposition treatment”, Surface and Coatings Technology, October 2006, 1880-1885.
18- Peter C. King and Ray W. Reynoldson, “Cr (N, C) diffusion coating formation on pre-nitrocarburised H13 tool steel”, Surface and Coatings Technology, February 2004, 18–26.
19- N. Zhao, Y. Xu, X. Huang, L. Zhong, J. Lu, “Microstructure and wear properties of niobium carbide particulates gradient-distribution composite layer fabricated in situ”, Ceramics International, December 2016, 18507-18515.
20- N. Zhao, Y. Xu, Y. Fu, “Mechanical properties of one-step in situ synthesized NbC-Fe composite coating”, Surface Coatings Technology, January 2017, 1105-1110.
21- F.E. Castillejo, J.J. Olaya, J.M. Arroyo-Osorio, “Nb-Cr complex carbide coatings on AISI D2 steel produced by the TRD process”, Journal of Brazilian Society of Mechanical Sciences Engineering, March 2014, 87-92.
22- F.E. Castillejo, D.M. Marulanda, J.J. Olaya, J.E. Alfonso, “Wear and corrosion resistance of niobium-chromium carbide coatings on AISI D2 produced through TRD”, Surface Coatings Technology, September 2014, 104-111.
23- O. Ganji, S.A. Sajjadi, Z.G. Yang, M. Mirjalili, M.R. Najari, “On the formation and properties of chromium carbide and vanadium carbide coatings produced on W1 tool steel through thermal reactive diffusion (TRD)”, Ceramics International, November 2020, 25320–25329.
24- Jin. Zhang, Shuai. Li, “Effect of process parameters on microstructure and wear resistance of niobium carbide coatings produced by pack cementation”, Materials Research Express, 2019, 096432.
25- Frederico A.P. Fernandes, Juno Gallego, “Wear and corrosion of niobium carbide coated AISI 52100 bearing steel”, Surface & Coatings Technology, October 2015, 112-117.
26- FE. Castillejo, DM. Marulanda, JJ. Olaya, “Production and characterization of niobium carbide coatings produced on tool steels by thermoreactive deposition/diffusion”, 2014.
27- N. Fillot, I. Iordanoff, Y. Berthier, “Wear modeling and the third body concept”, Wear, March 2007, 949-957.

مقالات آماده انتشار، پذیرفته شده
انتشار آنلاین از 24 آبان 1405