Abedini, Morteza Corrosion, erosion and erosion-corrosion behavior of SiC reinforced Ni-P coating on the surface of X65 steel [Volume 24, Issue 2, 2021, Pages 110-121]
Abutalebi, Mohammad Reza The effect of copper on the microstructure and mechanical properties of Bio Zn-Cu alloy [Volume 24, Issue 3, 2021, Pages 206-215]
Afshar, Saeedeh Comparison of tensile properties and work hardening rate of fine and coarse-grained 304 austenitic stainless steel [Volume 24, Issue 4, 2022, Pages 266-275]
Akbari, Maryam Replacement of the Chloride Washing Process in the Recovery of Zinc FromSteel-MakingDust with an Environmentally Friendly Method Based on Solvent Extraction [Volume 24, Issue 4, 2022, Pages 276-285]
Amiri, Payman Ab initio study of structural, electronic and optical properties of Calcium Carbonate compound [Volume 24, Issue 4, 2022, Pages 298-309]
Amiri, Peyman Theoretical investigation of the electronic and thermoelectric properties of Sb1-xAxNSr3, A=P, As, Bi [Volume 24, Issue 2, 2021, Pages 78-86]
Arabi, Hossein Numerical and Experimental Investigations on Fatigue Behavior of a Carabiner made from Al-7175 [Volume 24, Issue 2, 2021, Pages 98-109]
Arabi, Hossein Comparison of tensile properties and work hardening rate of fine and coarse-grained 304 austenitic stainless steel [Volume 24, Issue 4, 2022, Pages 266-275]
Ashtari, Pedram Replacement of the Chloride Washing Process in the Recovery of Zinc FromSteel-MakingDust with an Environmentally Friendly Method Based on Solvent Extraction [Volume 24, Issue 4, 2022, Pages 276-285]
Ataie, Abolghasem Optimization of leaching process of electric arc furnace dust to obtain the maximum recovery of Fe/Ca ratio in leaching solution [Volume 24, Issue 2, 2021, Pages 133-144]
Chaharmahali, Razieh A review of tribological performance of implants and metallic objects used in the body and the coating techniques employed to improve their wear resistance [Volume 24, Issue 2, 2021, Pages 145-163]
Cheraghzadeh, Mohammad Investigation of strain aging cracking susceptibility in IN738LC superalloy welded by autogenous TIG welding using numerical modeling [Volume 24, Issue 4, 2022, Pages 286-297]
Eshraghi, Seyed Fariborz A review on the presence of lasers in the processes of coating, repair, and prototyping [Volume 24, Issue 4, 2022, Pages 325-342]
Esteghamat, Amin Laser Cladding of Commercially Pure Titanium by Tungsten Carbide-Cobalt Composite Coating [Volume 24, Issue 1, 2021, Pages 18-29]
F
Farahani, Mehdi Computational study of influence of materials properties on Nitinol shape memory alloy stents behavior for application in trachea lumen [Volume 24, Issue 2, 2021, Pages 87-97]
Farshidianfar, Anooshiravan A review on the presence of lasers in the processes of coating, repair, and prototyping [Volume 24, Issue 4, 2022, Pages 325-342]
Farshidianfar, Mohammad Hossein A review on the presence of lasers in the processes of coating, repair, and prototyping [Volume 24, Issue 4, 2022, Pages 325-342]
Fattah-alhosseini, Arash A review of tribological performance of implants and metallic objects used in the body and the coating techniques employed to improve their wear resistance [Volume 24, Issue 2, 2021, Pages 145-163]
G
Ghasemi, Ali Evaluation of crystallization behavior of Mg65Cu30-xAgxY5 (x=1, 4, 7, 10) amorphous alloys produced by melt-spinning method [Volume 24, Issue 1, 2021, Pages 63-72]
Ghasemi, Samad Replacement of the Chloride Washing Process in the Recovery of Zinc FromSteel-MakingDust with an Environmentally Friendly Method Based on Solvent Extraction [Volume 24, Issue 4, 2022, Pages 276-285]
Gheisari, Khalilollah Effect of Anaerobic Bacterium Clostridium sp. on the Corrosion Behavior of the API X42MicroalloyedPipeline Steel in Saline Simulated Soil Solution [Volume 24, Issue 1, 2021, Pages 30-41]
Gholamipour, Reza Improving the sharpness index of the surgical blade using Zirconium-based bulk amorphous alloy [Volume 24, Issue 1, 2021, Pages 4-9]
Gordani, Gholam Reza Evaluation of crystallization behavior of Mg65Cu30-xAgxY5 (x=1, 4, 7, 10) amorphous alloys produced by melt-spinning method [Volume 24, Issue 1, 2021, Pages 63-72]
H
Hadi, Morteza Investigation of 60SPb20 steel flow stress changes in high-temperature compression tests [Volume 24, Issue 3, 2021, Pages 182-194]
H. Motamedi, Hossien Effect of Anaerobic Bacterium Clostridium sp. on the Corrosion Behavior of the API X42MicroalloyedPipeline Steel in Saline Simulated Soil Solution [Volume 24, Issue 1, 2021, Pages 30-41]
Hosseinabadi, Fereshteh The effect of copper on the microstructure and mechanical properties of Bio Zn-Cu alloy [Volume 24, Issue 3, 2021, Pages 206-215]
J
Jalalian Karazmoudeh, Nazanin Effect of temperature on TiC synthesis mechanism via eutectic KCl-LiCl salt medium [Volume 24, Issue 3, 2021, Pages 195-205]
Javadpour, Jafar Fabrication of Titanium-Silver porous dental implant using spark plasma sintering method [Volume 24, Issue 4, 2022, Pages 310-324]
K
Kamali Najafabadi, Mahdi Optimization of leaching process of electric arc furnace dust to obtain the maximum recovery of Fe/Ca ratio in leaching solution [Volume 24, Issue 2, 2021, Pages 133-144]
Karimi, Mohsen Comparison of tensile properties and work hardening rate of fine and coarse-grained 304 austenitic stainless steel [Volume 24, Issue 4, 2022, Pages 266-275]
Karimi, Saeid Replacement of the Chloride Washing Process in the Recovery of Zinc FromSteel-MakingDust with an Environmentally Friendly Method Based on Solvent Extraction [Volume 24, Issue 4, 2022, Pages 276-285]
Kashani-bozorg, Seyyed Farshid Laser Cladding of Commercially Pure Titanium by Tungsten Carbide-Cobalt Composite Coating [Volume 24, Issue 1, 2021, Pages 18-29]
KHODABAKHSHI, FARZAD Laser Cladding of Commercially Pure Titanium by Tungsten Carbide-Cobalt Composite Coating [Volume 24, Issue 1, 2021, Pages 18-29]
Khorshidi Fard, Mohammad Rasool Corrosion, erosion and erosion-corrosion behavior of SiC reinforced Ni-P coating on the surface of X65 steel [Volume 24, Issue 2, 2021, Pages 110-121]
Kia, ُSolmaz Designing and fabrication of zinc sulfide helical shape sculptured thin films and study of antibacterial properties of these porous structures [Volume 24, Issue 1, 2021, Pages 42-49]
Kolagar, Ali Mohammad Investigation of strain aging cracking susceptibility in IN738LC superalloy welded by autogenous TIG welding using numerical modeling [Volume 24, Issue 4, 2022, Pages 286-297]
Koohdar, Hamidreza Study on the microstructure and pseudoelastic behavior in an Fe-10Ni-7Mn (wt.%) alloy before and after high pressure torsion (HPT) processing [Volume 24, Issue 3, 2021, Pages 216-227]
M
Mahshad Rafatinia, Mahshad Replacement of the Chloride Washing Process in the Recovery of Zinc FromSteel-MakingDust with an Environmentally Friendly Method Based on Solvent Extraction [Volume 24, Issue 4, 2022, Pages 276-285]
Mirzakhani, Bahman Numerical and Experimental Investigations on Fatigue Behavior of a Carabiner made from Al-7175 [Volume 24, Issue 2, 2021, Pages 98-109]
Mohammad Alizadeh, Zahra Replacement of the Chloride Washing Process in the Recovery of Zinc FromSteel-MakingDust with an Environmentally Friendly Method Based on Solvent Extraction [Volume 24, Issue 4, 2022, Pages 276-285]
Mohammad Sadeghi, Bagher Numerical and Experimental Investigations on Fatigue Behavior of a Carabiner made from Al-7175 [Volume 24, Issue 2, 2021, Pages 98-109]
Mohammad Sadeghi, Bagher Comparison of tensile properties and work hardening rate of fine and coarse-grained 304 austenitic stainless steel [Volume 24, Issue 4, 2022, Pages 266-275]
Mohammad Sharifi, Ehsan Investigation of 60SPb20 steel flow stress changes in high-temperature compression tests [Volume 24, Issue 3, 2021, Pages 182-194]
Mostaan, Hossein Computational study of influence of materials properties on Nitinol shape memory alloy stents behavior for application in trachea lumen [Volume 24, Issue 2, 2021, Pages 87-97]
Mousavi, Golsa Fabrication of Titanium-Silver porous dental implant using spark plasma sintering method [Volume 24, Issue 4, 2022, Pages 310-324]
Mousavinezhad, Narghesosadat Theoretical investigation of the electronic and thermoelectric properties of Sb1-xAxNSr3, A=P, As, Bi [Volume 24, Issue 2, 2021, Pages 78-86]
N
Nabavi, Seyedeh Fatemeh A review on the presence of lasers in the processes of coating, repair, and prototyping [Volume 24, Issue 4, 2022, Pages 325-342]
Nadimi, Hamed Effect of temperature on TiC synthesis mechanism via eutectic KCl-LiCl salt medium [Volume 24, Issue 3, 2021, Pages 195-205]
Nazari, Mobin Synthesis and Characterization of Zr nanoparticles and investigation of the effect of Ball Mill on particle size distribution [Volume 24, Issue 3, 2021, Pages 228-235]
Nematzadeh, Fardin Numerical study of investigation of Nitinol shape memory alloy stents performance during contact with peripheral artery [Volume 24, Issue 1, 2021, Pages 50-62]
Nematzadeh, Fardin Computational study of influence of materials properties on Nitinol shape memory alloy stents behavior for application in trachea lumen [Volume 24, Issue 2, 2021, Pages 87-97]
Nouri, Meisam A review of tribological performance of implants and metallic objects used in the body and the coating techniques employed to improve their wear resistance [Volume 24, Issue 2, 2021, Pages 145-163]
O
Omidi, Rasul Synthesis and Characterization of Zr nanoparticles and investigation of the effect of Ball Mill on particle size distribution [Volume 24, Issue 3, 2021, Pages 228-235]
Ovaysi, Saeed Synthesis and Characterization of Zr nanoparticles and investigation of the effect of Ball Mill on particle size distribution [Volume 24, Issue 3, 2021, Pages 228-235]
P
Parsi, Negah Numerical and Experimental Investigations on Fatigue Behavior of a Carabiner made from Al-7175 [Volume 24, Issue 2, 2021, Pages 98-109]
Payandeh, Yousef Computational study of influence of materials properties on Nitinol shape memory alloy stents behavior for application in trachea lumen [Volume 24, Issue 2, 2021, Pages 87-97]
R
Raissi, Pouria Investigation of strain aging cracking susceptibility in IN738LC superalloy welded by autogenous TIG welding using numerical modeling [Volume 24, Issue 4, 2022, Pages 286-297]
Ranjbarnodeh, Eslam Investigation of strain aging cracking susceptibility in IN738LC superalloy welded by autogenous TIG welding using numerical modeling [Volume 24, Issue 4, 2022, Pages 286-297]
Rezaei, Mohammad Synthesis and Characterization of Zr nanoparticles and investigation of the effect of Ball Mill on particle size distribution [Volume 24, Issue 3, 2021, Pages 228-235]
S
Saghafian, Hasan Fabrication of Titanium-Silver porous dental implant using spark plasma sintering method [Volume 24, Issue 4, 2022, Pages 310-324]
Samei, Mohammad Investigation of 60SPb20 steel flow stress changes in high-temperature compression tests [Volume 24, Issue 3, 2021, Pages 182-194]
Sarpoolaky, Hossein Effect of temperature on TiC synthesis mechanism via eutectic KCl-LiCl salt medium [Volume 24, Issue 3, 2021, Pages 195-205]
Seyedein, Seyed Hossein The effect of copper on the microstructure and mechanical properties of Bio Zn-Cu alloy [Volume 24, Issue 3, 2021, Pages 206-215]
Shaeri, Mohammad hossein Effect of Ti and multidirectional forging on shear mechanical properties of in-situ ZA22-4Si composite [Volume 24, Issue 2, 2021, Pages 122-132]
Shanbedi, Amin Ab initio study of structural, electronic and optical properties of Calcium Carbonate compound [Volume 24, Issue 4, 2022, Pages 298-309]
Sheibani, Saeed Optimization of leaching process of electric arc furnace dust to obtain the maximum recovery of Fe/Ca ratio in leaching solution [Volume 24, Issue 2, 2021, Pages 133-144]
Simiari, Mahdi Synthesis and Characterization of Zr nanoparticles and investigation of the effect of Ball Mill on particle size distribution [Volume 24, Issue 3, 2021, Pages 228-235]
Soltanieh, Mansour Effect of temperature on TiC synthesis mechanism via eutectic KCl-LiCl salt medium [Volume 24, Issue 3, 2021, Pages 195-205]
T
Tabrizi, Narges Investigation of strain aging cracking susceptibility in IN738LC superalloy welded by autogenous TIG welding using numerical modeling [Volume 24, Issue 4, 2022, Pages 286-297]
Taghiabadi, Reza Effect of Ti and multidirectional forging on shear mechanical properties of in-situ ZA22-4Si composite [Volume 24, Issue 2, 2021, Pages 122-132]
Yousefi, Davoud Effect of Ti and multidirectional forging on shear mechanical properties of in-situ ZA22-4Si composite [Volume 24, Issue 2, 2021, Pages 122-132]
Z
Zamani, Mohammad The effect of copper on the microstructure and mechanical properties of Bio Zn-Cu alloy [Volume 24, Issue 3, 2021, Pages 206-215]
Zare Hasanabad, Rohollah Ab initio calculation of structure ,electronic ,optical and thermodynamic properties of CuSbTe2 [Volume 24, Issue 3, 2021, Pages 170-181]
