Abbasi Khazaei, Bijan Effect of homogenization treatment on microstructural evolution of dissimilar TLP joints for FSX-414/MBF-80/IN-738 system [Volume 17, Issue 55, 2014, Pages 19-27]
Abbasi Khazaei, Bijhan Effect of tempering treatment on microstructure and tensile properties of a ferrite- bainitie- martensite triple-phase steel [Volume 17, Issue 53, 2014, Pages 40-48]
Abdi, Hadi A Review on Investigation of different methods for measuring molten metal viscosity [Volume 17, Issue 55, 2014, Pages 45-54]
Abutalebi, Mohammad reza Texture evolution of ultrafine grained Al-7075 alloy produced by ECAP [Volume 17, Issue 56, 2015, Pages 49-57]
Akbari, Alireza Cr-rich precipitates impact on microstructure and mechanical properties of Fe-23Cr-2.4Mo ferritic stainless steel [Volume 17, Issue 53, 2014, Pages 9-16]
Alizad Farzin, Yousof Formation of Si-modified Nickel-Aluminide coating applied throughout a single step high activity-high temperature process on Nickel base superalloy [Volume 17, Issue 53, 2014, Pages 17-24]
Allahkaram, S.R. Effect of cobalt ion concentration of electroplating solution on morphology, phase structure and corrosion resistance of Zinc-Cobalt alloy coatings [Volume 17, Issue 55, 2014, Pages 12-18]
Ashrafi, Ali Effect of cladding powder composition on simultaneous synthesis of Cr and Mo and microstructure of the clads obtained on 304SS using GTAW process [Volume 17, Issue 54, 2014, Pages 10-17]
B
Bakhtiari, Reza Effect of homogenization treatment on microstructural evolution of dissimilar TLP joints for FSX-414/MBF-80/IN-738 system [Volume 17, Issue 55, 2014, Pages 19-27]
Bakhtiari, Reza Effect of tempering treatment on microstructure and tensile properties of a ferrite- bainitie- martensite triple-phase steel [Volume 17, Issue 53, 2014, Pages 40-48]
Bani Mustafa arab4, N. Effect of heat input on microstructure and mechanical properties of AZ91 magnesium alloy with using GTAW process [Volume 17, Issue 55, 2014, Pages 36-44]
Baradaran, Reaza Determination of Delta Ferrite Content and Morphology In 431 AISI Martensitic Stainless Steel [Volume 17, Issue 54, 2014, Pages 18-23]
C
Chehreghani, Ali Synthesis of Fe-TiC composite coating on plain carbon steel surface to hardness increasing by using laser alloying process [Volume 17, Issue 54, 2014, Pages 30-37]
D
Danyali, Daryoush Numerical and experimental investigation of the residual stress distribution in shell-tube pressure vessels weld joint [Volume 17, Issue 56, 2015, Pages 28-38]
Delgoshaee, Hamed Effect of cobalt ion concentration of electroplating solution on morphology, phase structure and corrosion resistance of Zinc-Cobalt alloy coatings [Volume 17, Issue 55, 2014, Pages 12-18]
E
Ebrahimniya, Mohammad Microstructural investigation of laser remelted electrospark deposited layer on IN738LC super alloy [Volume 17, Issue 54, 2014, Pages 3-9]
Elahi, S.Hossein A Review on Investigation of different methods for measuring molten metal viscosity [Volume 17, Issue 55, 2014, Pages 45-54]
Esmailpour, Maryam Effects of surface tension reducing additive on surface morphology and wetting behavior of polyurethane coatings [Volume 17, Issue 56, 2015, Pages 39-48]
F
Farhangi, Hasan Effect of cobalt ion concentration of electroplating solution on morphology, phase structure and corrosion resistance of Zinc-Cobalt alloy coatings [Volume 17, Issue 55, 2014, Pages 12-18]
Farjam Hajiagha, Khadijeh Cr-rich precipitates impact on microstructure and mechanical properties of Fe-23Cr-2.4Mo ferritic stainless steel [Volume 17, Issue 53, 2014, Pages 9-16]
Fereshtekheslat, Jamaleddin Influence of the Step Martempering and Anisotropy on the Distortion Value a Cold Rolled Hot Work Tool Steel [Volume 17, Issue 56, 2015, Pages 11-18]
Fotovvati, Behzad Evaluating a proper profile in free hydraulic bulging test on stainless steel type 316 for determination the tubular material properties [Volume 17, Issue 54, 2014, Pages 38-45]
G
Ghasemi, Behroz Formation of Si-modified Nickel-Aluminide coating applied throughout a single step high activity-high temperature process on Nickel base superalloy [Volume 17, Issue 53, 2014, Pages 17-24]
Goodarzi, Masoud Synthesis of Fe-TiC composite coating on plain carbon steel surface to hardness increasing by using laser alloying process [Volume 17, Issue 54, 2014, Pages 30-37]
H
Hosseinkhannejad, Ehsan Formation of Si-modified Nickel-Aluminide coating applied throughout a single step high activity-high temperature process on Nickel base superalloy [Volume 17, Issue 53, 2014, Pages 17-24]
Hosseinnjad, Siyamak Investigating of the cold rolling and annealing effects on microstructure and mechanical properties of nanostructured Ni-Cr-Mn Marajing steel [Volume 17, Issue 54, 2014, Pages 24-29]
J
Jaami, Abdolrahman Evaluating a proper profile in free hydraulic bulging test on stainless steel type 316 for determination the tubular material properties [Volume 17, Issue 54, 2014, Pages 38-45]
Jahanbakhsh, Abbas Effect of homogenization treatment on microstructural evolution of dissimilar TLP joints for FSX-414/MBF-80/IN-738 system [Volume 17, Issue 55, 2014, Pages 19-27]
K
Keshavarzalamdari, Eskandar Extraction Mechanism of Palladium from chloride solution by TBP-Kerosene [Volume 17, Issue 53, 2014, Pages 3-8]
Khalili, Araman Synthesis of Fe-TiC composite coating on plain carbon steel surface to hardness increasing by using laser alloying process [Volume 17, Issue 54, 2014, Pages 30-37]
Khodabandeh, Alireza Effect of heat input on microstructure and mechanical properties of AZ91 magnesium alloy with using GTAW process [Volume 17, Issue 55, 2014, Pages 36-44]
M
Malek Ghayeni, Farshid Microstructural investigation of laser remelted electrospark deposited layer on IN738LC super alloy [Volume 17, Issue 54, 2014, Pages 3-9]
Mirbagheri, Mohammad Hossein Effect of ageing heat treatment on the mechanical behavior of Cu rich A356 metal foam [Volume 17, Issue 53, 2014, Pages 49-55]
Mirzakhani, Bahman Experimental Study of the Effect of Electroplating Temperature and Time in Manufacturing of Smart Material of Ionic Polymer-Metal Composites (IPMC) [Volume 17, Issue 53, 2014, Pages 33-39]
Monshi, Ahmad Effects of surface tension reducing additive on surface morphology and wetting behavior of polyurethane coatings [Volume 17, Issue 56, 2015, Pages 39-48]
N
Naderi, Malek Determination of Delta Ferrite Content and Morphology In 431 AISI Martensitic Stainless Steel [Volume 17, Issue 54, 2014, Pages 18-23]
Nami, Bahram Effect of heat input on microstructure and mechanical properties of AZ91 magnesium alloy with using GTAW process [Volume 17, Issue 55, 2014, Pages 36-44]
Niroumand, Behzad Effects of surface tension reducing additive on surface morphology and wetting behavior of polyurethane coatings [Volume 17, Issue 56, 2015, Pages 39-48]
Nourouzi, Salman Residual Stresses Evaluation in Tungsten Carbide Cobalt Coating from HVOF Process Using XRD Method [Volume 17, Issue 54, 2014, Pages 46-56]
R
Rafiee, Farzad Effect of heat input on microstructure and mechanical properties of AZ91 magnesium alloy with using GTAW process [Volume 17, Issue 55, 2014, Pages 36-44]
Ramazani Movagh, Masoud Determination of Delta Ferrite Content and Morphology In 431 AISI Martensitic Stainless Steel [Volume 17, Issue 54, 2014, Pages 18-23]
Ramezanzadeh, Bahram Effects of surface tension reducing additive on surface morphology and wetting behavior of polyurethane coatings [Volume 17, Issue 56, 2015, Pages 39-48]
Ranjbarnodeh, Islam Numerical and experimental investigation of the residual stress distribution in shell-tube pressure vessels weld joint [Volume 17, Issue 56, 2015, Pages 28-38]
Raufi, Mahdi Experimental Study of the Effect of Electroplating Temperature and Time in Manufacturing of Smart Material of Ionic Polymer-Metal Composites (IPMC) [Volume 17, Issue 53, 2014, Pages 33-39]
Razaghi, Mehran Experimental Study of the Effect of Electroplating Temperature and Time in Manufacturing of Smart Material of Ionic Polymer-Metal Composites (IPMC) [Volume 17, Issue 53, 2014, Pages 33-39]
Razavi, Seyed hossein Influence of the Step Martempering and Anisotropy on the Distortion Value a Cold Rolled Hot Work Tool Steel [Volume 17, Issue 56, 2015, Pages 11-18]
Rikhtegar, Farshid Investigation on the dispersion mechanism of carbon nanotubes in Al matrix during processing of Al-CNT nanocomposite using slurry based method [Volume 17, Issue 56, 2015, Pages 3-10]
S
Sabouhi, Mohammad Ali Investigating of the cold rolling and annealing effects on microstructure and mechanical properties of nanostructured Ni-Cr-Mn Marajing steel [Volume 17, Issue 54, 2014, Pages 24-29]
Sadeghi, Nima Extraction Mechanism of Palladium from chloride solution by TBP-Kerosene [Volume 17, Issue 53, 2014, Pages 3-8]
Saeedi, moloud Extraction Mechanism of Palladium from chloride solution by TBP-Kerosene [Volume 17, Issue 53, 2014, Pages 3-8]
Saghafian, Hasan Investigation on the dispersion mechanism of carbon nanotubes in Al matrix during processing of Al-CNT nanocomposite using slurry based method [Volume 17, Issue 56, 2015, Pages 3-10]
Saghafian, Hasan Effects of Austempering and Martempering Heat Treatments on wear Behavior of Cr-Mo Steels (FMU-226) Used in Mills Liner [Volume 17, Issue 55, 2014, Pages 3-11]
Salahi, Esmaei Effects of surface tension reducing additive on surface morphology and wetting behavior of polyurethane coatings [Volume 17, Issue 56, 2015, Pages 39-48]
Salehi, Mahdi Effect of cladding powder composition on simultaneous synthesis of Cr and Mo and microstructure of the clads obtained on 304SS using GTAW process [Volume 17, Issue 54, 2014, Pages 10-17]
Salehi, Mohammad taghi Texture evolution of ultrafine grained Al-7075 alloy produced by ECAP [Volume 17, Issue 56, 2015, Pages 49-57]
Sales, Robab Residual Stresses Evaluation in Tungsten Carbide Cobalt Coating from HVOF Process Using XRD Method [Volume 17, Issue 54, 2014, Pages 46-56]
Salimi Jazi, Hamidreza Effect of cladding powder composition on simultaneous synthesis of Cr and Mo and microstructure of the clads obtained on 304SS using GTAW process [Volume 17, Issue 54, 2014, Pages 10-17]
Seyyedein, S.Hossein Texture evolution of ultrafine grained Al-7075 alloy produced by ECAP [Volume 17, Issue 56, 2015, Pages 49-57]
Shabestari, S. Effects of Austempering and Martempering Heat Treatments on wear Behavior of Cr-Mo Steels (FMU-226) Used in Mills Liner [Volume 17, Issue 55, 2014, Pages 3-11]
Shabestari, Saeed Investigation on the dispersion mechanism of carbon nanotubes in Al matrix during processing of Al-CNT nanocomposite using slurry based method [Volume 17, Issue 56, 2015, Pages 3-10]
Shaeri, M.H. Effects of Austempering and Martempering Heat Treatments on wear Behavior of Cr-Mo Steels (FMU-226) Used in Mills Liner [Volume 17, Issue 55, 2014, Pages 3-11]
Shaeri, Mohammad hossein Texture evolution of ultrafine grained Al-7075 alloy produced by ECAP [Volume 17, Issue 56, 2015, Pages 49-57]
Shaeri, Morteza Texture evolution of ultrafine grained Al-7075 alloy produced by ECAP [Volume 17, Issue 56, 2015, Pages 49-57]
Shahverdi, Hamidreza Microstructural investigation of laser remelted electrospark deposited layer on IN738LC super alloy [Volume 17, Issue 54, 2014, Pages 3-9]
Shahverdi, Hmidreza A Review on Investigation of different methods for measuring molten metal viscosity [Volume 17, Issue 55, 2014, Pages 45-54]
Soltani, Hasan Effect of ageing heat treatment on the mechanical behavior of Cu rich A356 metal foam [Volume 17, Issue 53, 2014, Pages 49-55]
Soltani, Mohammad Ali Determination of Delta Ferrite Content and Morphology In 431 AISI Martensitic Stainless Steel [Volume 17, Issue 54, 2014, Pages 18-23]
T
Talebi, Amir Effect of tempering treatment on microstructure and tensile properties of a ferrite- bainitie- martensite triple-phase steel [Volume 17, Issue 53, 2014, Pages 40-48]
Tondpour, S.Jvad Effect of cladding powder composition on simultaneous synthesis of Cr and Mo and microstructure of the clads obtained on 304SS using GTAW process [Volume 17, Issue 54, 2014, Pages 10-17]
Torkamany, Mohammad Javd Synthesis of Fe-TiC composite coating on plain carbon steel surface to hardness increasing by using laser alloying process [Volume 17, Issue 54, 2014, Pages 30-37]
Towhidi, Naser The Model for Monitoring of Pollutants in Pyrometallurgy Industries Located in Different Regions [Volume 17, Issue 55, 2014, Pages 28-37]
V
Vahdat, S.E. The Model for Monitoring of Pollutants in Pyrometallurgy Industries Located in Different Regions [Volume 17, Issue 55, 2014, Pages 28-37]
Vali, Hamed Effect of ageing heat treatment on the mechanical behavior of Cu rich A356 metal foam [Volume 17, Issue 53, 2014, Pages 49-55]
Z
Zangenehmadar, Karim Formation of Si-modified Nickel-Aluminide coating applied throughout a single step high activity-high temperature process on Nickel base superalloy [Volume 17, Issue 53, 2014, Pages 17-24]
