[1] Nathaniel, O. K., “Characterization of Inconel 718: Using Gleeble and Varestraint Testing Methods to Determine the Weldability of Inconel 718”, 2010 , MS Thesis,
California Polytechnic State University - San Luis Obispo.
[2] DuPont, j. N., Lippold, J. C., Kiser S. D., “Welding metallurgy and weldability of nickel-base alloys”, John Wiley & Sons, INC., New Jersey, 2009.
[3] Egbewande, A.T., Buckson, R. A., Ojo, O. A., “Analysis of laser beam weldability of Inconel 738 superalloy”, Materials characterization 61, 2010, pp. 569-574.
[4] Danis, Y., Arvieu, C., Lacoste, E., Larrouy, T., Quenisset, J. M.,“An investigation on thermal, metallurgical and mechanical states in weld cracking of Inconel 738LC superalloy” , Materials and Design, 31 , 2010., pp 402–416 .
[5] Zhong, M., Sun, H., Liu, W., Zhu, X., He, J., “Boundary liquation and interface cracking characterization in laser deposition of Inconel 738 on directionally solidified Ni-based superalloy”, Scripta Materialia 53, 2005.,pp 159–164.
[6] Durocher, J., Richards, N.L., “Characterization of the Micro-Welding Process for Repair of Nickel Base Superalloys”, ASM International, Journal of Materials Engineering and Performance,Volume 16(6), 2007.
[7] Ojo, O.A., Richards, N.L., Chaturvedi, M.C., “Microstructural study of weld fusion zone of TIG welded IN 738LC nickel-based superalloy”, Scripta Materialia 51, 2004, pp 683 – 688.
[8] Ojo, O.A., Richards, N.L., Chaturvedi, M.C., “Study of the Fusion Zone and Heat-Affected Zone Microstructures in Tungsten Inert Gas–Welded INCONEL 738LC Superalloy”, Metallurgical and materials transactions A, 2006, pp 421- 434.
[9] Sidhu, R.K., Ojo, O.A., Chaturvedi, M.C., “Microstructural Analysis of Laser-Beam-Welded Directionally Solidified INCONEL 738”, Metallurgical and materials transactions A, volume 38A, 2007, pp 858— 869 .
[10] Ojo, O.A., Richards, N.L., Chaturvedi. M.C., “Contribution of constitutional liquation of gamma prime precipitate to weld HAZ cracking of cast Inconel 738 superalloy”, Scripta Materialia 50, 2004, pp 641–646.
[11] R. N Johnson, J. A Bailey, “Electro-Spark Deposited for replacement of chrome plating”, Pacific Northwest National Laboratory, 2005, Contractor Report ARAET-CR-05002.
[12] Sartwell, D.B., “Electrospark Deposition for Depot- and Field-Level Component Repair and Replacement of Hard Chromium Plating”, U.S. Department of defense, Environmental Security Technology Certification Program (ESTCP), Final Report, 2006.
[13] Tang, S.K., “The Process Fundamentals and Parameters of Electro-Spark Deposition”, MS thesis, Waterloo University, Ontario, Canada, 2009.
[14] Sheldon, G.L., Johnson, R.N., “Spark deposition- a technique for producing wear resistant coatings”, International Conference on Wear of Materials, 1985.
[15] Johnson, R.N., “ElectroSpark Deposition: Principles and Applications,” Society of Vacuum Coaters, 45th Annual Technical Conference Proceedings, 2002, pp 87 – 92.
[16] Wang, M.C., Wang, W.f., Xie, Y. J., Zhang, J., “Electro-spark epitaxial deposition of NiCoCrAlYTa alloy on directionally solidified nickel-based superalloy”, Trans. Nonferrous Met. Soc. China 20, 2010, pp 795-802.
[17] Ebrahimnia, M., Ghaini, F.M., Shahverdi, H.R., “Hot cracking in pulsed laser processing of a nickel base superalloy built up by electrospark deposition”, Science and Technology of Welding and Joining, 2014 (19): 25-29.
[18] ابراهیم نیا، محمد. مالک قایینی، فرشید. شاهوردی، حمیدرضا. 1392، بررسی ریزساختار لایه های ایجاد شده توسط فرایند الکترواسپارک بر روی سوپر آلیاژ IN738LC ، اولین همایش ملی فلزات و آلیاژهای غیر آهنی، (مواد و فناوری های نوین کاربردی)، مشهد– سالن همایشهای فردوسی جهاد دانشگاهی مشهد.
