Adeli, Mandana Investigation of the effect of pelletizing parameters on physical and mechanical properties of pellets prepared from Kahnouj ilmenite concentrate [Volume 21, Issue 4, 2019, Pages 264-274]
Ahmad Reza, Abbasian Production and characterization of Ni2AlSi nanocrystalline intermetallic compound via mechanical alloying process [Volume 21, Issue 4, 2019, Pages 284-291]
ALIMOHAMMADI, VAHID Synthesis and characterization of Functionalized magnetite nanoparticles by alkyl group (Fe3O4@TMOS) [Volume 21, Issue 4, 2019, Pages 275-283]
Alizadeh, mehdi Determination of optimum conditions for the production of suitable green pellets from concentrates of iron ore with a low blain by organic and inorganic additives [Volume 21, Issue 3, 2018, Pages 216-224]
Alizadeh, Mohsen Determination of optimum conditions for the production of suitable green pellets from concentrates of iron ore with a low blain by organic and inorganic additives [Volume 21, Issue 3, 2018, Pages 216-224]
Asgari, Hamid Reza Study on crystallization of rapid solidified ribbons of (Al90Ni8Zr2)98Mm2 alloy [Volume 21, Issue 1, 2018, Pages 4-9]
Ashrafizadeh, Fakhreddin Influence of Porosity on Fatigue of Cast Nickel Aluminum Bronze and AProposed Method to Reduce scatter of data [Volume 21, Issue 3, 2018, Pages 187-197]
B
Bagherpour, Alireza Synthesis and characterization of Functionalized magnetite nanoparticles by alkyl group (Fe3O4@TMOS) [Volume 21, Issue 4, 2019, Pages 275-283]
Bahrami, Mohsen Study on the effect of first step agetemperature on the mechanical properties and microstructure of Al-Cu-Mg alloy intwo steps aging process [Volume 21, Issue 1, 2018, Pages 24-31]
Balali, Mostafa Study and Comparison of Simple Shear Extrusion and Accumulative Roll Bonding Processes in Improving the Mechanical and Structural Properties of Copper [Volume 21, Issue 2, 2018, Pages 118-128]
Borhani, Ehsan A brief review on effect of accumulative roll bonding routes on microstructure and mechanical properties of nanostructure alloys and nanocomposites based on aluminum [Volume 21, Issue 1, 2018, Pages 32-45]
E
Elahi, Seyed Hossein Investigating on Viscosity Variation of Molten Zinc via Different Temperatures [Volume 21, Issue 2, 2018, Pages 102-107]
Emamy, Masoud The effect of zinc on microstructure and solidification characteristics of Al-Zn-Mg-Cu alloys [Volume 21, Issue 4, 2019, Pages 252-263]
Emamy, Massoud Microstructural Evolution and Mechanical Properties of Al5083 Composite Reinforced with In-Situ TiB2 Particles [Volume 21, Issue 4, 2019, Pages 292-299]
Enayatmanesh, Kimiya Investigation of Microstructure and mechanical properties of A356/SiC nanocomposites produced via a modified vortex method [Volume 21, Issue 3, 2018, Pages 207-215]
Eslami, Amir Hossein Study and Comparison of Simple Shear Extrusion and Accumulative Roll Bonding Processes in Improving the Mechanical and Structural Properties of Copper [Volume 21, Issue 2, 2018, Pages 118-128]
F
Fallahi, Morteza Investigation of the effect of pelletizing parameters on physical and mechanical properties of pellets prepared from Kahnouj ilmenite concentrate [Volume 21, Issue 4, 2019, Pages 264-274]
Faraji, Fariborz Effect of Deep Cryogenic Treatment on Precipitation Hardening of Aluminum 2024 and 7075 [Volume 21, Issue 3, 2018, Pages 225-236]
Farhani, Mehdi Investigation of the effect of pelletizing parameters on physical and mechanical properties of pellets prepared from Kahnouj ilmenite concentrate [Volume 21, Issue 4, 2019, Pages 264-274]
Fazeli, Hamid Copper Cone Shell production Using Electroforming Process and Investigating Parameters Effect on the Process by the use of Numerical Simulation [Volume 21, Issue 3, 2018, Pages 198-206]
Fooladi Mahani, Saghar Influence of Porosity on Fatigue of Cast Nickel Aluminum Bronze and AProposed Method to Reduce scatter of data [Volume 21, Issue 3, 2018, Pages 187-197]
G
Gheisari, Khalilollah Effect of Sulfate Reducing Bacteria on the Corrosion Behavior of the HSLA X70 Steel in Bacteria Culture Medium [Volume 21, Issue 2, 2018, Pages 129-138]
Gholamipour, Reza Study on crystallization of rapid solidified ribbons of (Al90Ni8Zr2)98Mm2 alloy [Volume 21, Issue 1, 2018, Pages 4-9]
Golozar, Mohammad Ali Influence of Porosity on Fatigue of Cast Nickel Aluminum Bronze and AProposed Method to Reduce scatter of data [Volume 21, Issue 3, 2018, Pages 187-197]
H
Habibi Rezaei, Mehran Synthesis and characterization of Functionalized magnetite nanoparticles by alkyl group (Fe3O4@TMOS) [Volume 21, Issue 4, 2019, Pages 275-283]
Hashemi Niasari, Masood Effect of bias voltage on the structure, morphology and hardness of ZrN
coating deposited by reactive magnetron sputtering [Volume 21, Issue 2, 2018, Pages 95-101]
Heydari Pebdani, Hamid Copper Cone Shell production Using Electroforming Process and Investigating Parameters Effect on the Process by the use of Numerical Simulation [Volume 21, Issue 3, 2018, Pages 198-206]
J
Jafarian, Hamidreza Effect of Severe Plastic Deformation byHigh Pressure Torsion on the Microstructure, Mechanical Properties and Pseudoelastic Behavior of the Fe-10Ni-7Mn (wt.%) Steel after Intercritical Annealing treatment [Volume 21, Issue 3, 2018, Pages 176-186]
Jafari Jozan, Mohammad Amin Effect of cold rolling and short-term annealing on microstructure and hardness of A356 aluminum alloy [Volume 21, Issue 3, 2018, Pages 237-246]
Jafari Pirlari, Alireza Microstructural Evolution and Mechanical Properties of Al5083 Composite Reinforced with In-Situ TiB2 Particles [Volume 21, Issue 4, 2019, Pages 292-299]
Jafarzadegan, Mostafa Investigation of hardness Hall-Petch relationship in the stir zone of fiction stir welds between austenitic stainless steel and plain carbon steel [Volume 21, Issue 1, 2018, Pages 46-53]
Jamaati, Roohollah Effect of cold rolling and short-term annealing on microstructure and hardness of A356 aluminum alloy [Volume 21, Issue 3, 2018, Pages 237-246]
Javadi, Mehrdad Production and characterization of Ni2AlSi nanocrystalline intermetallic compound via mechanical alloying process [Volume 21, Issue 4, 2019, Pages 284-291]
Javadi, Seyed Mohammad Effect of Two-Phase Gas-Solid Flow into the Cyclone on the Immersion Tubes Behavior by Numerical Method and Microstructural Analyses [Volume 21, Issue 2, 2018, Pages 139-148]
Javadzadeh Kalahroudi, Faezeh Effect of Severe Plastic Deformation byHigh Pressure Torsion on the Microstructure, Mechanical Properties and Pseudoelastic Behavior of the Fe-10Ni-7Mn (wt.%) Steel after Intercritical Annealing treatment [Volume 21, Issue 3, 2018, Pages 176-186]
Jilan, Hamze ali Determination of optimum conditions for the production of suitable green pellets from concentrates of iron ore with a low blain by organic and inorganic additives [Volume 21, Issue 3, 2018, Pages 216-224]
K
Kashanian, faezeh Synthesis and characterization of Functionalized magnetite nanoparticles by alkyl group (Fe3O4@TMOS) [Volume 21, Issue 4, 2019, Pages 275-283]
Kolagar, Ali Mohammad The effect of hot Isostatic pressing on microstructure and mechanical properties of nickel based gas turbine blade [Volume 21, Issue 1, 2018, Pages 72-81]
Koohdar, Hamidreza Effect of Severe Plastic Deformation byHigh Pressure Torsion on the Microstructure, Mechanical Properties and Pseudoelastic Behavior of the Fe-10Ni-7Mn (wt.%) Steel after Intercritical Annealing treatment [Volume 21, Issue 3, 2018, Pages 176-186]
L
Liaghat, Gholamhossein Copper Cone Shell production Using Electroforming Process and Investigating Parameters Effect on the Process by the use of Numerical Simulation [Volume 21, Issue 3, 2018, Pages 198-206]
M
Madanypoor, Reza Effect of bias voltage on the structure, morphology and hardness of ZrN
coating deposited by reactive magnetron sputtering [Volume 21, Issue 2, 2018, Pages 95-101]
Malekan, Mehdi The effect of zinc on microstructure and solidification characteristics of Al-Zn-Mg-Cu alloys [Volume 21, Issue 4, 2019, Pages 252-263]
Maleki, Mohammad Study on the effect of first step agetemperature on the mechanical properties and microstructure of Al-Cu-Mg alloy intwo steps aging process [Volume 21, Issue 1, 2018, Pages 24-31]
Masoudpanah, S. Morteza Effect of bias voltage on the structure, morphology and hardness of ZrN
coating deposited by reactive magnetron sputtering [Volume 21, Issue 2, 2018, Pages 95-101]
Mehman navaz, Hossein Copper Cone Shell production Using Electroforming Process and Investigating Parameters Effect on the Process by the use of Numerical Simulation [Volume 21, Issue 3, 2018, Pages 198-206]
Mirak, Alireza effect of pouring temperature on micro structure and hot tensile on Nickle-Iron base super alloy [Volume 21, Issue 2, 2018, Pages 108-117]
Mirzadeh, Hamed Physically-based constitutive equation for prediction of the flow stress of microalloyed steel during hot deformation [Volume 21, Issue 1, 2018, Pages 10-15]
Mohagheghpour, elham Effect of thermal treatment on structure and Curie temperature of Ni-Cu (70.4-29.6;W/W) ferromagnetic alloy [Volume 21, Issue 2, 2018, Pages 88-94]
Mojtahedzadeh larijani, Majid Effect of thermal treatment on structure and Curie temperature of Ni-Cu (70.4-29.6;W/W) ferromagnetic alloy [Volume 21, Issue 2, 2018, Pages 88-94]
Mostaan, Hossein Production and characterization of Ni2AlSi nanocrystalline intermetallic compound via mechanical alloying process [Volume 21, Issue 4, 2019, Pages 284-291]
Mostafapoor, Saman The effect of zinc on microstructure and solidification characteristics of Al-Zn-Mg-Cu alloys [Volume 21, Issue 4, 2019, Pages 252-263]
Mozammel, Mahdi investigation into the effect of Heat Treatment Base Metal on the microstructure of Friction Stir Processed Brass [Volume 21, Issue 4, 2019, Pages 312-321]
N
Naghizadeh, Meysam Microstructural Evolution and Mechanical Properties of Al5083 Composite Reinforced with In-Situ TiB2 Particles [Volume 21, Issue 4, 2019, Pages 292-299]
Najafi, Hamidreza Study of changes in the strength and hardness of H13 steel during short-term creep [Volume 21, Issue 2, 2018, Pages 149-167]
Nategh, Said Study of changes in the strength and hardness of H13 steel during short-term creep [Volume 21, Issue 2, 2018, Pages 149-167]
Nazarian, Hadi Effect of Deep Cryogenic Treatment on Precipitation Hardening of Aluminum 2024 and 7075 [Volume 21, Issue 3, 2018, Pages 225-236]
Nili-Ahmadabadi, Mahmoud Effect of Severe Plastic Deformation byHigh Pressure Torsion on the Microstructure, Mechanical Properties and Pseudoelastic Behavior of the Fe-10Ni-7Mn (wt.%) Steel after Intercritical Annealing treatment [Volume 21, Issue 3, 2018, Pages 176-186]
P
Payandeh, Yousef Study on the effect of first step agetemperature on the mechanical properties and microstructure of Al-Cu-Mg alloy intwo steps aging process [Volume 21, Issue 1, 2018, Pages 24-31]
R
Rafiei, Mahdi The effect of chemical composition of filler metal on properties of dissimilar joint between AISI316 and AISI430 steels welded by GTAW [Volume 21, Issue 1, 2018, Pages 54-71]
Rafiei, Mahdi Production and characterization of Ni2AlSi nanocrystalline intermetallic compound via mechanical alloying process [Volume 21, Issue 4, 2019, Pages 284-291]
Rahmati, Sadegh Copper Cone Shell production Using Electroforming Process and Investigating Parameters Effect on the Process by the use of Numerical Simulation [Volume 21, Issue 3, 2018, Pages 198-206]
Rajabi, Marjan Effect of thermal treatment on structure and Curie temperature of Ni-Cu (70.4-29.6;W/W) ferromagnetic alloy [Volume 21, Issue 2, 2018, Pages 88-94]
Rajaei, Majid Investigating on Viscosity Variation of Molten Zinc via Different Temperatures [Volume 21, Issue 2, 2018, Pages 102-107]
Rasouli, Iman The effect of chemical composition of filler metal on properties of dissimilar joint between AISI316 and AISI430 steels welded by GTAW [Volume 21, Issue 1, 2018, Pages 54-71]
Roghani Mamaghani, Hamed A brief review on effect of accumulative roll bonding routes on microstructure and mechanical properties of nanostructure alloys and nanocomposites based on aluminum [Volume 21, Issue 1, 2018, Pages 32-45]
S
Saeid, Tohid investigation into the effect of Heat Treatment Base Metal on the microstructure of Friction Stir Processed Brass [Volume 21, Issue 4, 2019, Pages 312-321]
Sarajan, Zohair Study of changes in the strength and hardness of H13 steel during short-term creep [Volume 21, Issue 2, 2018, Pages 149-167]
Sazegaran, Hamid Manufacturing of Amorphous Phase in the Al80Fe20 System through Mechanical Alloying and Investigation on the Thermal Stability of Its [Volume 21, Issue 1, 2018, Pages 16-23]
Sazegaran, Hamid Effect of Two-Phase Gas-Solid Flow into the Cyclone on the Immersion Tubes Behavior by Numerical Method and Microstructural Analyses [Volume 21, Issue 2, 2018, Pages 139-148]
Seyedkashi, S. M. Hossein Study and Comparison of Simple Shear Extrusion and Accumulative Roll Bonding Processes in Improving the Mechanical and Structural Properties of Copper [Volume 21, Issue 2, 2018, Pages 118-128]
Seyyed Ebrahimi, S. A. Synthesis and characterization of Functionalized magnetite nanoparticles by alkyl group (Fe3O4@TMOS) [Volume 21, Issue 4, 2019, Pages 275-283]
Shahri, Farzad Study on crystallization of rapid solidified ribbons of (Al90Ni8Zr2)98Mm2 alloy [Volume 21, Issue 1, 2018, Pages 4-9]
Shaker, Saeid investigation into the effect of Heat Treatment Base Metal on the microstructure of Friction Stir Processed Brass [Volume 21, Issue 4, 2019, Pages 312-321]
Shirazi, Hassan Effect of Severe Plastic Deformation byHigh Pressure Torsion on the Microstructure, Mechanical Properties and Pseudoelastic Behavior of the Fe-10Ni-7Mn (wt.%) Steel after Intercritical Annealing treatment [Volume 21, Issue 3, 2018, Pages 176-186]
Soltanieh, Mansour Investigation of the effect of pelletizing parameters on physical and mechanical properties of pellets prepared from Kahnouj ilmenite concentrate [Volume 21, Issue 4, 2019, Pages 264-274]
Spitzer, K. H. Investigation of the effect of pelletizing parameters on physical and mechanical properties of pellets prepared from Kahnouj ilmenite concentrate [Volume 21, Issue 4, 2019, Pages 264-274]
T
Taghizadeh Tabrizi, Arvin investigation into the effect of Heat Treatment Base Metal on the microstructure of Friction Stir Processed Brass [Volume 21, Issue 4, 2019, Pages 312-321]
V
Vahabzadeh, Seyed Iman Manufacturing of Amorphous Phase in the Al80Fe20 System through Mechanical Alloying and Investigation on the Thermal Stability of Its [Volume 21, Issue 1, 2018, Pages 16-23]
Vahdat, Seyed Ebrahim Effect of Deep Cryogenic Treatment on Precipitation Hardening of Aluminum 2024 and 7075 [Volume 21, Issue 3, 2018, Pages 225-236]
Vahdati Khaki, Jalil Manufacturing of Amorphous Phase in the Al80Fe20 System through Mechanical Alloying and Investigation on the Thermal Stability of Its [Volume 21, Issue 1, 2018, Pages 16-23]
