@article { author = {Sazegaran, Hamid and Javadi, Seyed Mohammad}, title = {Effect of Two-Phase Gas-Solid Flow into the Cyclone on the Immersion Tubes Behavior by Numerical Method and Microstructural Analyses}, journal = {Metallurgical Engineering}, volume = {21}, number = {2}, pages = {139-148}, year = {2018}, publisher = {Iranian Metallurgical Engineers}, issn = {1563-1745}, eissn = {}, doi = {10.22076/me.2018.61731.1125}, abstract = {Damage caused by the two-phase gas-solid flow on the immersion tubes into the cyclone in cement industry that involved the environmental corrosive and abrasive factors is very important. In this work, the effect of particle flow and impact on the corrosion of the immersion tube was studied by the simulation of two-phase gas-solid into the cyclone. The results of gas-solid particle flow simulation and investigation on the particle abrasion on the immersion tube were shown that the impact of particle and shear stress is more in the upper half compared to the lower half. In addition, microstructural studies conducted by optical and scanning electron microscopies on the severely corroded sections of immersion tubes were shown that chromium carbide in the grain boundaries of austenite is formed and the cracks nucleated and growth along the grain boundaries of austenite. Formation of chromium carbide in the grain boundaries of austenite caused to decreasing the chromium from the areas adjacent to the grain boundaries, and as a result, intergranular corrosion occurred. Furthermore, the abrasion of the particle impact on the upper half of the immersion tube leading to severe corrosion based on the erosion corrosion mechanism.}, keywords = {Immersion tube,Particle flow,Stainless steel,Intergranular corrosion,Erosion corrosion}, title_fa = {مطالعه اثر جریان دو فازی گاز- جامد درون سیکلون بر رفتار خوردگی ایمرژن تیوب‌ها به روش عددی و ارزیابی ریزساختاری}, abstract_fa = {صدمات ناشی از جریان دو فازی گاز- جامد در قطعات ایمرژن تیوب داخل سیکلون‌های صنعت سیمان که عوامل خورنده محیطی و عوامل ساینده در آن وجود دارد، حائز اهمیت فراوانی است. در این مقاله، با شبیه‌سازی جریان دو فازی گاز- جامد داخل سیکلون به مطالعه اثر جریان ذرات و برخورد آن‌ها بر خوردگی دیواره‌های ایمرژن تیوب پرداخته شده است. نتایج شبیه‌سازی جریان گاز- ذرات جامد و نتایج به دست آمده از مطالعات سایش ذرات بر روی قطعات ایمرژن تیوب نشان می‌دهد که میزان برخورد ذرات و مقدار تنش برشی در نیمه بالایی در مقایسه با نیمه پایینی آن بیشتر است. علاوه بر این، مطالعات ریزساختاری صورت گرفته توسط میکروسکوپ نوری و میکروسکوپ الکترونی روبشی بر روی قسمت‌هایی از قطعات ایمرژن تیوب‌ها که به شدت دچار خوردگی شده‌اند، نشان می‌دهد که کاربید کروم در مرزدانه‌های آستنیت تشکیل شده‌ است و ترک‌ها در امتداد مرزدانه‌های آستنیت جوانه‌زنی و رشد کرده‌اند. تشکیل کاربید کروم در مرزدانه‌های آستنیت منجر به فقیر شدن نواحی مجاور مرزدانه‌ها از کروم می‌شود و در نتیجه، خوردگی مرزدانه‌ای رخ می‌دهد. علاوه بر این، سایش ناشی از برخورد ذرات در نیمه بالایی قطعات ایمرژن تیوب منجر به تشدید خوردگی بر اساس مکانیزم خوردگی سایشی می‌شود.}, keywords_fa = {ایمرژن تیوب,جریان ذرات,فولاد زنگ‌نزن,خوردگی مرزدانه‌ای,خوردگی سایشی}, url = {https://www.metalleng.ir/article_33518.html}, eprint = {https://www.metalleng.ir/article_33518_8d059daa8487945ad8d48df121cb0481.pdf} }