@article { author = {Asgari, Hamid Reza and Gholamipour, Reza and Shahri, Farzad}, title = {Study on crystallization of rapid solidified ribbons of (Al90Ni8Zr2)98Mm2 alloy}, journal = {Metallurgical Engineering}, volume = {21}, number = {1}, pages = {4-9}, year = {2018}, publisher = {Iranian Metallurgical Engineers}, issn = {1563-1745}, eissn = {}, doi = {10.22076/me.2018.77437.1167}, abstract = {In the present study, crystallization behavior of amorphous (Al90Ni8Zr2)98MM2 alloy have been investigated using X-ray diffraction, differential scanning calorimetry (DSC) and micro-hardness test. For this purpose, amorphous ribbons were manufactured using a melt-spinning apparatus. The average thickness of the produced ribbon was 20 micrometers. The results of the kinetic test showed that the crystallization in the amorphous alloy (Al90Ni8Zr2)98MM2 occurs at least in three steps. DSC graphs were analyzed using Kissinger's method and the activation energy for the first, second and a third stage of crystallization was 331, 241, and 330 kJ/mole, respectively. The results of micro-hardness test showed that the amorphous phase hardness at room temperature was 413 Vickers, which was reduced to 276Hv by isothermal heat treatment at temperatures close to first transformation temperatures. It has been observed that, after heat treatment at a temperature above α-Al phase transformation temperature, the hardness increases to 453Hv. Formation of intermetallic phases at 800K, cause the hardness drop to 269Hv.}, keywords = {Amorphous Aluminum Alloy,Activation Energy,Crystallization,Melt-spinning}, title_fa = {بررسی استحاله تبلور در نوار انجماد سریع شده آلیاژ (Al90Ni8Zr2)98Mm2}, abstract_fa = {در پژوهش حاضر رفتارتبلور آلیاژ آمورف (Al90Ni8Zr2)98Mm2 با استفاده از روشهای پراش پرتو ایکس (XRD)، گرماسنجی روبشی افتراقی (DSC) و آزمون ریزسختی مورد بررسی قرار گرفته است. بدین منظور نوارهای آمورف با استفاده از دستگاه مذاب ریسی تولید شدند. ضخامت متوسط نوارهای تولید شده برابر با 20 میکرومتر بود. نتایج آزمون گرماسنجی روبش افتراقی نشان داد که تبلور در آلیاژ آمورف (Al90Ni8Zr2)98Mm2 حداقل در سه مرحله مجزا رخ می دهد. نمودارهای آنالیز حرارتی با استفاده از روش کیسینجر تحلیل شد و انرژی فعال سازی برای مراحل اول، دوم و سوم فرآیند تبلور به ترتیب برابر با 331، 241 و 330 کیلو ژول بر مول بدست آمد. میکروسختی فاز آمورف در دمای اتاق برابر با 413 ویکرز بدست آمد که با انجام عملیات حرارتی به صورت هم دما تا دماهای پیش از دمای مرحله اول فرآیند تبلور به 276 ویکرز کاهش یافت. همچنین با افزایش دمای عملیات حرارتی تا دمایی بعد از مرحله اول تبلور و پس از تشکیل کریستالیتهای α-Al در زمینه آمورف، سختی به 453 ویکرز افزایش یافته است و در نهایت با تشکیل فازهای بین فلزی در دمای K800، مقدار سختی به 269 ویکرز کاهش یافت.}, keywords_fa = {آلیاژ آلومینیوم آمورف,انرژی فعال سازی,تبلور,مذاب ریسی}, url = {https://www.metalleng.ir/article_33476.html}, eprint = {https://www.metalleng.ir/article_33476_db4cc5ed552e2b82b9653ecb84cff7f7.pdf} }