@article { author = {Taghizadeh, Milad and Nili-Ahmadabadi, Mahmoud and Baghani, Mostafa and Malekoshoaraei, Mohammad hassan and Habibi Parsa, Mohammad}, title = {Control of shape memory, pseudoelastic and thermal recovery behavior of NiTi/NiTiCu bi-layer composite aided by FEM simulation}, journal = {Metallurgical Engineering}, volume = {20}, number = {3}, pages = {148-161}, year = {2017}, publisher = {Iranian Metallurgical Engineers}, issn = {1563-1745}, eissn = {}, doi = {10.22076/me.2017.67767.1141}, abstract = {In this paper the effects of thickness ratio on pseudoelastic, shape memory and thermal recovery properties of NiTi/NiTiCu bi-layer composite was investigated by using FEM simulation and experimental results. The NiTi/NiTiCu bi-layer composites with different thickness ratios designed and analyzed in ABAQUS software using SMA constitutive 3D model presented by Lagoudas et al. The pseudoelastic and shape memory strain values for different composites were studied and measured as well as thermal recovery strain and its rate. For validating the results of the FEM study NiTi/NiTiCu bi-layer composites were made and tensile tested. The results indicate a high correlation between two methods that leads to reduce the number of experiments to optimizing the composite behavior, also, considering the results of the FEM method, the NiTi/NiTiCu bi-layer composite shows high potential in adjusting pseudoelastic and shape memory properties and also deformation parameters such as stress and strain plateau with changing the thickness ratio that can be considered in SMA components design.}, keywords = {Shape Memory Alloys,FEM study,Bi-layer composites,Strain thermal recovery}, title_fa = {کنترل رفتار سودوالاستیک، حافظه‌داری و بازیابی حرارتی در کامپوزیت دولایه آستنیتی-مارتنزیتی آلیاژ نایتینول به کمک شبیه‌سازی عددی و نتایج آزمایشگاهی}, abstract_fa = {در این مقاله تاثیر نسبت ضخامت بر کنترل خواص کامپوزیت دولایه مارتنزیتی-آستنیتی ساخته شده از آلیاژ نایتینول توسط دو روش شبیه سازی عددی و ساخت نمونه مورد بررسی قرار گرفته است. برای این کار از نرم افزار آباکوس با مدل ساختاری ارائه شده توسط لاگوداس و همکاران استفاده شده است. در روش عددی علاوه بر بررسی تغییرات کرنش حافظه داری و سوپرالاستیک با پارامتر نسبت ضخامت، تاثیر درصد کرنش و تغییرات نسبت ضخامت بر روی سرعت بازیابی و میزان بازیابی کرنش مورد ارزیابی قرار گرفته شده است. به منظور بررسی صحت جواب های به دست آمده از روش شبیه سازی عددی، نتایج روش تجربی ساخت نمونه آورده شده است. نتایج دلالت بر تطبیق بالایی میان داده های حاصل از دو روش دارد، همچنین بررسی ها نشان میدهد که کامپوزیت دولایه با نسبت ضخامت های مختلف پتانسیل بالایی را در ارائه کردن دامنه ای از رفتار حافظه داری و سوپر الاستیسیته و همپنین پارامترهای تغییر شکل، از خود نشان می دهد که می تواند مورد توجه طراحان در زمینه های ساخت عملگرهای حافظه دار و همچنین دیگر اجزای ساخته شده از جنس آلیاژهای حافظه دار باشد.}, keywords_fa = {آلیاژ حافظه‌دار,شبیه‌سازی عددی,کامپوزیت دولایه,بازیابی حرارتی کرنش}, url = {https://www.metalleng.ir/article_31121.html}, eprint = {https://www.metalleng.ir/article_31121_e218355db7018ecb61b1528bceeb8ba1.pdf} }