@article { author = {کاظمی, مریم and ثقفیان, حسن and خیراندیش, شهرام and سلیمانی گیلاکجانی, رضا}, title = {The Effect of Laser Surface Compositing Using Nd:YAG Pulsed Laser with TiC Particles On Tribological behavior of H13 Tool Steel}, journal = {Metallurgical Engineering}, volume = {20}, number = {1}, pages = {4-14}, year = {2017}, publisher = {Iranian Metallurgical Engineers}, issn = {1563-1745}, eissn = {}, doi = {10.22076/me.2017.55904.1117}, abstract = {Because of high strength, hardness and chemical stability of titanium carbide (TiC), it is known as an ideal material for manufacturing the different types of composite. In this study, surface of hot work H13 tool steel was composited with TiC particles using pulsed Nd:YAG laser process. Hardness of the composited surfaces was measured with a Vickers microhardness tester. Characterization of the composited area was done using scanning electron microscope (SEM) which equipped to energy dispersive X-ray spectroscopy (EDS), field emission scanning electron microscope (FESEM) and X-ray diffraction technique. In order to investigation of tribological behavior of non-treated and composited samples, pin-on-disk test was employed. Characterization results showed a composited zone without any crack and porosity, with appropriate incorporation and uniform distribution of TiC particles in the matrix. The results of tribological test illustrated that incorporation of TiC particles with their initial morphology and high hardness and strength, not only decrease the friction coefficient, but also improve the wear resistance of composited surfaces in compare with H13 non-composited surfaces.}, keywords = {Hot work H13 tool steel,Laser,TiC particles,Pulsed Nd:YAG laser,Tribological behavior}, title_fa = {تاثیر کامپوزیت سازی سطحی لیزری با ذرات کاربید تیتانیم بر رفتار تریبولوژیکی فولاد ابزار گرمکار H13}, abstract_fa = {ذرات کاربید تیتانیم (TiC) به دلیل دارا بودن استحکام، سختی و پایداری الکتروشیمیایی بالا، به عنوان ماده‌ای ایده‌آل جهت ساخت برخی از انواع کامپوزیت‌ها شناخته شده‌اند. در این پژوهش، به منظور کامپوزیت سازی سطح فولاد ابزار گرمکار 13H، از ذرات کاربید تیتانیم (TiC) پیش‌نشانی شده و فرآیند کامپوزیت سازی لیزر پالسی Nd:YAGاستفاده شده است. پروفیل سختی سطوح کامپوزیت‌شده توسط آزمون ریزسختی سنجی ویکرز، مورد بررسی قرار گرفت. مشخصه‌یابی پوشش‌ها به کمک میکروسکوپ الکترونی روبشی (SEM) مجهز به طیف‌نگار تفکیک انرژی (EDS)، میکروسکوپ الکترونی روبشی گسیل میدانی (FESEM) و آنالیز پراش پرتو ایکس (XRD) انجام گرفت. رفتار تریبولوژیکی سطوح کامپوزیتی و زیرلایه با آزمون پین روی دیسک مورد ارزیابی قرار گرفت و ضریب اصطکاک آنها نیز گزارش شد. نتایج نشان داد که مشارکت مناسب و توزیع یکنواخت ذرات TiC در مناطق کامپوزیتی، سبب ایجاد سطوحی عاری از هر گونه ترک و تخلخل شده و همچنین مشارکت ذرات TiC با سختی و استحکام بالا، از یک سو سبب کاهش ضریب اصطکاک و از سوی دیگر با جلوگیری از تغییر فرم پلاستیک و ترک‌های سطحی، سبب بهبود مقاومت سایشی نمونه‌های کامپوزیتی نسبت به سطوح غیرکامپوزیتی، شد.}, keywords_fa = {فولاد ابزار گرمکار 13H,ذرات کاربید تیتانیم (TiC),لیزر پالسی Nd:YAG,رفتار تریبولوژیکی}, url = {https://www.metalleng.ir/article_30161.html}, eprint = {https://www.metalleng.ir/article_30161_40a5486ffaa83b03e4094e256c415342.pdf} }