@article { author = {seifollahi, masumeh and اصغری, زهرا and عباسی, سیدمهدی and مرکباتی, مریم}, title = {Effects of B and Zr on the microstructure and low cycle fatigue properties of Nimonic 105 superalloy at 750 C}, journal = {Metallurgical Engineering}, volume = {19}, number = {4}, pages = {239-248}, year = {2016}, publisher = {Iranian Metallurgical Engineers}, issn = {1563-1745}, eissn = {}, doi = {10.22076/me.2017.52504.1109}, abstract = {Microstructure and low cycle-high temperature fatigue properties of Nimonic 105 superalloys with and without B and Zr is investigated in this article. Fully reversed strain-controlled tests were performed at 750°C, R=0 and strain rate of 3×10-3 s-1. The results show that Zr cause to ZrC formation at the grain boundaries and grain interior. Also Zr is reduced the grain size of the alloys. The carbides at the absence of Zr is of the type of (Cr,Mo)23C6 at the grain boundaries. The ᵧ’ size decreased by B additions to the alloys and the number of twins increased. 0.013wt% B improves low cycle-high temperature fatigue of the alloy. At the presence of B, fracture is of the types of intragranular and intergranular but by addition of 0.16wt% Zr the only fracture type is intragranular. Hard and none coherent MC type precipitates by Zr addition are the initiation place for micrcraking and the cause of fatigue life reduction .}, keywords = {Nimonic 105 superalloy,Low Cycle-High temperature fatigue (LCF),Boron,zirconium}, title_fa = {اثر بور و زیرکونیوم بر ریزساختار و استحکام خستگی سوپر آلیاژ Nimonic 105 در دمای ˚C 750}, abstract_fa = {در این تحقیق، ریزساختار و خواص خستگی کم‌چرخه دما بالای سوپر آلیاژ Nimonic 105 در حضور بور و زیرکونیم مورد بررسی قرار گرفته است. آزمون خستگی کم چرخه در شرایط کرنش کنترل (کرنش 8/0) با نرخ بارگذاری s-13-10×3 در 0=R در دمای °C 750 در اتمسفر محیط انجام شده است. نتایج نشان داد که عنصر زیرکونیم سبب تشکیل کاربیدهای ZrC در مرز دانه‌ها و درون دانه‌ها می‌گردد. همچنین افزودن عنصر زیرکونیم سبب کاهش اندازه دانه آلیاژ شده است. در غیاب عنصر زیرکونیم رسوبات کاربیدی عمدتاً از نوع (Cr,Mo)23C6 و در مرزدانه‌ها یافت می‌شوند. عنصر بور سبب کاهش اندازه رسوبات ´γ می‌شود. با افزودن بور دوقلویی‌ها در ساختار افزایش چشمگیری دارد. افزودن عنصر بور تا 013/0% وزنی سبب بهبود خواص خستگی کم چرخه دما بالای آلیاژ می‌شود. در حضور( 013/0% وزنی) بور، شکست از نوع درون دانه‌ای و بین دانه‌ای است؛ در حالی که با افزودن عنصر زیرکونیم تا 16/0% وزنی نوع شکست کاملاً بین دانه‌ای می‌باشد. تشکیل کاربیدهای سخت صفحه‌ای MC ناشی از افزودن Zr که یک شبکه غیر‌کوهرنت با زمینه و مرزدانه‌ها دارند، مکان‌های شروع و تکثیر ریزترک‌ها را فراهم می‌کند. در نتیجه در حضور عنصر زیرکونیم ترک‌های ثانویه افزایش و عمر خستگی آلیاژ کاهش می‌یابد.}, keywords_fa = {سوپرآلیاژ Nimonic 105,خستگی کم‌چرخه دما بالا (LCF),بور,زیرکونیم}, url = {https://www.metalleng.ir/article_30156.html}, eprint = {https://www.metalleng.ir/article_30156_938f947cdac5130eb9c3f385092cbecd.pdf} }