@article { author = {Gorzin, Hesamoddin and Ghaemi, Ahad and Maleki, Ali}, title = {Experimental study and optimization of effective parameters on extraction Praseodymium and Neodymium from simulated NdFeB magnet-leaching solutions using Bis (2,4,4-trimethylpentyl) phosphinic acid}, journal = {Metallurgical Engineering}, volume = {23}, number = {3}, pages = {182-195}, year = {2020}, publisher = {Iranian Metallurgical Engineers}, issn = {1563-1745}, eissn = {}, doi = {10.22076/me.2021.130043.1290}, abstract = {Praseodymium (Pr) and neodymium (Nd) are among the rare earth elements that have received significant attention due to their many applications. In this research, the separation of Pr and Nd from simulated NdFeB magnet leaching solutions with Cyanex 272/kerosene was modeled and optimized. Response surface methodology (RSM) based on the central composite design (CCD) was applied to fit the polynomial equation to the experimental data. The effects of variables such as concentration of Cyanex 272 (0.23-0.57 mol.L-1), pH (2.0-5.0) and O/A (1-3) on the extraction efficiency and separation factor of Pr and Nd were studied. The order of the effect of the variables on the extraction efficiency was opposite to the effect of the variables on the separation factor. The numerical optimization was performed to maximize the operational selectivity of the studied system. The calculated results for Nd and Pr extraction percentages were 71.7% and 62.5%, respectively and the separation factor was 1.54. Also, it was found the stripping of Pr and Nd ions from the loaded organic phase can be effectively conducted under the 0.1 mol/L hydrochloric acid solution within a contact time of 5 min conditions. The studied system showed an efficient performance in both extraction and striping processes of Pr and Nd at investigated condition. }, keywords = {Solvent extraction,Praseodymium,Neodymium,Chloride solution,Cyanex 272,Response surface methodology}, title_fa = {مطالعه تجربی و بهینه‌سازی پارامترهای موثر بر استخراج پرازئودیمیم و نئودیمیم از محلول شبیه‌سازی شده لیچ آهن‌ربای نئودیمیم-آهن-بور با سیانکس 272}, abstract_fa = {عناصر پرازئودیمیم (Pr) و نئودیمیم (Nd) جزو دسته عناصر نادر خاکی سبک هستند که به دلیل کاربردهای فراوان بسیار مورد توجه بوده‌اند. در این تحقیق استخراج پرازئودیمیم و نئودیمیم از محلول شبیه‌سازی لیچ آهن‌ربای نئودیمیم-آهن-بور با مخلوط سیانکس 272/کروزن مدل‌سازی تجربی و بهینه‌سازی گردید. برای مدل‌سازی تجربی فرآیند، از روش سطح پاسخ بر مبنای طرح مرکب مرکزی استفاده گردید. در انجام آزمایش‌های تجربی، اثر متغیرهای غلظت سیانکس 272 در فاز آلی (mol/L 57/0- 23/0)، pH فاز آبی (0/5-0/2) و نسبت فاز آلی به آبی (3-1) بر پاسخ‌های بازدهی استخراج Nd، بازدهی استخراج Pr و فاکتور جداسازی مطالعه گردید و معادلات پیش‌بینی‌کننده پاسخ‌های مورد نظر ارائه گردیدند. ترتیب میزان اثرگذاری متغیرها بر بازدهی استخراج برخلاف ترتیب اثرگذاری آن‌ها بر فاکتور جداسازی حاصل گردید. در نهایت نیز بهینه‌سازی سیستم مورد مطالعه با هدف دست‌یابی به بیش‌ترین گزینش‌پذیری عملیاتی انجام گردید که نتایج برای بازدهی استخراج Nd و Pr و فاکتور جداسازی به ترتیب برابر %7/71، %5/62 و 54/1 بدست آمد. هم‌چنین مطالعه فرآیند دفع فاز آلی بارگیری شده با یون‌های Pr و Nd نشان داد که بازیابی تقریبا کامل فاز آلی تحت شرایط غلظت اسید هیدروکلریک برابر  mol/L 1/0 و زمان تماس 5 دقیقه امکان پذیر است. در واقع سیستم مورد مطالعه عملکرد مناسبی را هم در فرآیند استخراج و هم در فرآیند دفع Pr و Nd در شرایط مورد بررسی نشان داد.}, keywords_fa = {استخراج حلالی,پرازئودیمیم,نئودیمیم,محلول کلریدی,سیانکس 272}, url = {https://www.metalleng.ir/article_241734.html}, eprint = {https://www.metalleng.ir/article_241734_ac94e6449f33da3cd898cae4e8da06cf.pdf} }