Abbasi, Majid Microstructurally and Electromagnetically Evaluations of Aging Phenomenon in 2304 Duplex Stainless Steel [Volume 23, Issue 2, 2020, Pages 103-117]
Abbasi, seyed Mahdi Effects of Remelting on the Microstructure and Absorption/Desorption Characteristics of MmNi4.8Al0.2 Hydrogen Storage Alloy [Volume 23, Issue 2, 2020, Pages 131-141]
Abdous, Hamed On the free volumes of severely deformed pure Fe and Cu, similarities and differences [Volume 23, Issue 1, 2020, Pages 4-15]
Abedi, Amir The effect of pre-existing twin on the shear deformation behavior of AZ31 magnesium alloy [Volume 23, Issue 4, 2021, Pages 328-337]
Ahmadi Dermeni, Hossein Effect of H321 stabilizing treatment on microstructure, hardness, and grain boundary corrosion resistance of 5083 aluminum alloy [Volume 23, Issue 3, 2020, Pages 196-205]
Akhondzadeh, Adly The Growth kinetic of γ̍ Precipitations in cold rolled Waspaloy [Volume 23, Issue 4, 2021, Pages 338-346]
Alinejad, Hossein Microstructurally and Electromagnetically Evaluations of Aging Phenomenon in 2304 Duplex Stainless Steel [Volume 23, Issue 2, 2020, Pages 103-117]
Alizadeh, mehdi Improving cyanidation process of the gold ore containing sulfide compounds by water treatment and adding sodium ferrate [Volume 23, Issue 1, 2020, Pages 38-48]
Alizadeh, Mohsen Improving cyanidation process of the gold ore containing sulfide compounds by water treatment and adding sodium ferrate [Volume 23, Issue 1, 2020, Pages 38-48]
Amirkhani Dehkordi, Mohamad Amin Calculation of Microhardness Changes in 2.5 MeV Proton Irradiation on TSX Grade Graphite Structure [Volume 23, Issue 2, 2020, Pages 154-162]
Ansari, Zahra Investigation of effect of pH and calcination on Synthesis of nanostructured hydroxyapatite (HA) and flour-hydroxyapatite (FHA) by Sol-Gel Method [Volume 23, Issue 1, 2020, Pages 49-61]
Asadi Asadabad, Mohsen Calculation of Microhardness Changes in 2.5 MeV Proton Irradiation on TSX Grade Graphite Structure [Volume 23, Issue 2, 2020, Pages 154-162]
Ashrafi, Ali Effect of frequency changes in pulsed deposition process on the composition and morphology of CoCrFeMnNi high entropy alloy coatings [Volume 23, Issue 3, 2020, Pages 245-254]
Askari, Masoud Modeling, kinetics investigation and determining the controlling mechanisms of atmospheric oxidation of “Cold-Briquetted Iron and Carbon (CBIC)” [Volume 23, Issue 3, 2020, Pages 206-219]
B
Baghshahi, Saeed Synthesis of Titanium Diboride Nanoparticles by Volume Combustion Synthesis Method [Volume 23, Issue 4, 2021, Pages 319-327]
Baradaran Mehrabadi, Hadi The Effects of Temperature and Time on the Kinetic of the Intermetallic Layers Growth During Aluminizing Process of a Low Carbon Steel [Volume 23, Issue 1, 2020, Pages 62-73]
C
Constantin, Ionut Effect of frequency changes in pulsed deposition process on the composition and morphology of CoCrFeMnNi high entropy alloy coatings [Volume 23, Issue 3, 2020, Pages 245-254]
D
Divandari, Mehdi The Effects of Temperature and Time on the Kinetic of the Intermetallic Layers Growth During Aluminizing Process of a Low Carbon Steel [Volume 23, Issue 1, 2020, Pages 62-73]
F
Fallahi, Babak On the free volumes of severely deformed pure Fe and Cu, similarities and differences [Volume 23, Issue 1, 2020, Pages 4-15]
Farhadinia, Faranak Synthesis of Titanium Diboride Nanoparticles by Volume Combustion Synthesis Method [Volume 23, Issue 4, 2021, Pages 319-327]
Farmani, Saber Effect of H321 stabilizing treatment on microstructure, hardness, and grain boundary corrosion resistance of 5083 aluminum alloy [Volume 23, Issue 3, 2020, Pages 196-205]
Fatemi, Seyed Mahmood The effect of pre-existing twin on the shear deformation behavior of AZ31 magnesium alloy [Volume 23, Issue 4, 2021, Pages 328-337]
Forouzanmehr, Nazanin On the free volumes of severely deformed pure Fe and Cu, similarities and differences [Volume 23, Issue 1, 2020, Pages 4-15]
G
Ganjefard, Khalil Effect of Si and Fe on thermal modification behavior of Al-4.5Cu-xSi-yFe [Volume 23, Issue 3, 2020, Pages 255-269]
Ghaemi, Ahad Experimental study and optimization of effective parameters on extraction Praseodymium and Neodymium from simulated NdFeB magnet-leaching solutions using Bis (2,4,4-trimethylpentyl) phosphinic acid [Volume 23, Issue 3, 2020, Pages 182-195]
Ghaemi, Ahad Experimental study of uranium adsorption from solid waste solution of the Monel reactor using the Amberlite IRA- 910 resin in the ion exchange process [Volume 23, Issue 4, 2021, Pages 296-318]
Ghazi Mir Saeed, seyed Mahdi Effects of Remelting on the Microstructure and Absorption/Desorption Characteristics of MmNi4.8Al0.2 Hydrogen Storage Alloy [Volume 23, Issue 2, 2020, Pages 131-141]
Gheybat Khajeh, Hojjat mechanochemical reduction of Cobalt oxide by Aluminum and carbon and investigating the effect of milling parameters on the production of Co-Al2O3 composite powder [Volume 23, Issue 1, 2020, Pages 28-37]
Ghorbanian, Babak Application of Response Surface Method to Optimize Thickness and Hardness of Chromium Carbide Coatings Created by Thermo-Reactive Diffusion (TRD) [Volume 23, Issue 3, 2020, Pages 235-244]
Goodarzi, Massoud mechanochemical reduction of Cobalt oxide by Aluminum and carbon and investigating the effect of milling parameters on the production of Co-Al2O3 composite powder [Volume 23, Issue 1, 2020, Pages 28-37]
Gorzin, Hesamoddin Experimental study and optimization of effective parameters on extraction Praseodymium and Neodymium from simulated NdFeB magnet-leaching solutions using Bis (2,4,4-trimethylpentyl) phosphinic acid [Volume 23, Issue 3, 2020, Pages 182-195]
H
Hasani, Saeed Non-Isothermal Kinetic Analysis of Oxidation of Mg-0.15Al Alloy Powder [Volume 23, Issue 1, 2020, Pages 16-27]
Hasanzadeh, Mostafa Calculation of Microhardness Changes in 2.5 MeV Proton Irradiation on TSX Grade Graphite Structure [Volume 23, Issue 2, 2020, Pages 154-162]
Hassanzadeh Tabrizi, Seyed Ali Fabrication and Investigation of Toxicity of CuFe2O4 Nanoparticles Synthesized by Combustion Sol-Gel Method for Hyperthermia Application [Volume 23, Issue 3, 2020, Pages 220-234]
Hemmati, alireza Experimental study of uranium adsorption from solid waste solution of the Monel reactor using the Amberlite IRA- 910 resin in the ion exchange process [Volume 23, Issue 4, 2021, Pages 296-318]
Heydarzadeh Sohi, Mahmoud Formation of nickel aluminide coatings via post heat treatment of nickel plated AA2024 aluminum alloy [Volume 23, Issue 4, 2021, Pages 282-295]
J
Jafarzadegan, Mostafa Simulation of heat transfer in gas tungsten arc welding of stainless steel type 304 [Volume 23, Issue 1, 2020, Pages 74-83]
K
Kalantar, Mahdi Investigation of effect of pH and calcination on Synthesis of nanostructured hydroxyapatite (HA) and flour-hydroxyapatite (FHA) by Sol-Gel Method [Volume 23, Issue 1, 2020, Pages 49-61]
Kashani-bozorg, Seyyed Farshid 3D-Printing of Inconel-625 Superalloy by Selective Laser Melting [Volume 23, Issue 4, 2021, Pages 347-358]
Kharaziha isfahani, Mahshid Investigation of effect of pH and calcination on Synthesis of nanostructured hydroxyapatite (HA) and flour-hydroxyapatite (FHA) by Sol-Gel Method [Volume 23, Issue 1, 2020, Pages 49-61]
Khiabani, Arash Formation of nickel aluminide coatings via post heat treatment of nickel plated AA2024 aluminum alloy [Volume 23, Issue 4, 2021, Pages 282-295]
Khodabakhshi, Farzad 3D-Printing of Inconel-625 Superalloy by Selective Laser Melting [Volume 23, Issue 4, 2021, Pages 347-358]
Khoram Shahi, Farhad Effect of WC content on porosity percentage, microstructure, and mechanical behavior of steel foam manufactured through powder metallurgy using space holder technique [Volume 23, Issue 2, 2020, Pages 142-153]
M
Maarefvand, Majid Optimization and kinetic study of leaching process in recycling of Ga from waste LED [Volume 23, Issue 2, 2020, Pages 118-130]
Maleki, Ali Experimental study and optimization of effective parameters on extraction Praseodymium and Neodymium from simulated NdFeB magnet-leaching solutions using Bis (2,4,4-trimethylpentyl) phosphinic acid [Volume 23, Issue 3, 2020, Pages 182-195]
Mansoorinejad, Mostafa The influence of extrusion die angle on the deformation force and hardness of AA6061 aged aluminum section [Volume 23, Issue 4, 2021, Pages 276-281]
Mirvakili, Sayed Mohamad Calculation of Microhardness Changes in 2.5 MeV Proton Irradiation on TSX Grade Graphite Structure [Volume 23, Issue 2, 2020, Pages 154-162]
Mirzakhani, Bahman The influence of extrusion die angle on the deformation force and hardness of AA6061 aged aluminum section [Volume 23, Issue 4, 2021, Pages 276-281]
Moeinfar, Khashayar 3D-Printing of Inconel-625 Superalloy by Selective Laser Melting [Volume 23, Issue 4, 2021, Pages 347-358]
Mofid, Mohammad Ammar Simulation of heat transfer in gas tungsten arc welding of stainless steel type 304 [Volume 23, Issue 1, 2020, Pages 74-83]
Mohammadi Fathabad, Sobhan Evaluation of magnetic and giant magnetoimpedance properties in amorphous Co-based biosensor [Volume 23, Issue 2, 2020, Pages 163-175]
Mokmeli, Mohammad The effect of copper smelting technology on the dissolution of anodes at the Sarcheshmeh copper electrorefining plant [Volume 23, Issue 2, 2020, Pages 90-101]
Momeni, Hossein Effect of H321 stabilizing treatment on microstructure, hardness, and grain boundary corrosion resistance of 5083 aluminum alloy [Volume 23, Issue 3, 2020, Pages 196-205]
Monirvaghefi, Seyed Mahmoud Effect of frequency changes in pulsed deposition process on the composition and morphology of CoCrFeMnNi high entropy alloy coatings [Volume 23, Issue 3, 2020, Pages 245-254]
Morakabati, Maryam The Growth kinetic of γ̍ Precipitations in cold rolled Waspaloy [Volume 23, Issue 4, 2021, Pages 338-346]
N
Nemat, Saman Synthesis of Titanium Diboride Nanoparticles by Volume Combustion Synthesis Method [Volume 23, Issue 4, 2021, Pages 319-327]
Nili-Ahmadabadi, Mahmoud On the free volumes of severely deformed pure Fe and Cu, similarities and differences [Volume 23, Issue 1, 2020, Pages 4-15]
O
Oraki, Mehdi The Growth kinetic of γ̍ Precipitations in cold rolled Waspaloy [Volume 23, Issue 4, 2021, Pages 338-346]
P
Paknahad, Pouyan Modeling, kinetics investigation and determining the controlling mechanisms of atmospheric oxidation of “Cold-Briquetted Iron and Carbon (CBIC)” [Volume 23, Issue 3, 2020, Pages 206-219]
Payandeh, Yousef The influence of extrusion die angle on the deformation force and hardness of AA6061 aged aluminum section [Volume 23, Issue 4, 2021, Pages 276-281]
R
Rahmati, Akram Experimental study of uranium adsorption from solid waste solution of the Monel reactor using the Amberlite IRA- 910 resin in the ion exchange process [Volume 23, Issue 4, 2021, Pages 296-318]
S
Saffar Teluri, Ali Fabrication and Investigation of Toxicity of CuFe2O4 Nanoparticles Synthesized by Combustion Sol-Gel Method for Hyperthermia Application [Volume 23, Issue 3, 2020, Pages 220-234]
Saghafian, Hasan The Effects of Temperature and Time on the Kinetic of the Intermetallic Layers Growth During Aluminizing Process of a Low Carbon Steel [Volume 23, Issue 1, 2020, Pages 62-73]
Salehi, Ali Improving cyanidation process of the gold ore containing sulfide compounds by water treatment and adding sodium ferrate [Volume 23, Issue 1, 2020, Pages 38-48]
Sazegaran, Hamid Effect of WC content on porosity percentage, microstructure, and mechanical behavior of steel foam manufactured through powder metallurgy using space holder technique [Volume 23, Issue 2, 2020, Pages 142-153]
Sedghi, Arman Synthesis of Titanium Diboride Nanoparticles by Volume Combustion Synthesis Method [Volume 23, Issue 4, 2021, Pages 319-327]
Seifollahi, Masumeh The Growth kinetic of γ̍ Precipitations in cold rolled Waspaloy [Volume 23, Issue 4, 2021, Pages 338-346]
Seyedraoufi, Zahrasadat Formation of nickel aluminide coatings via post heat treatment of nickel plated AA2024 aluminum alloy [Volume 23, Issue 4, 2021, Pages 282-295]
Shabestari, Saeed Effect of H321 stabilizing treatment on microstructure, hardness, and grain boundary corrosion resistance of 5083 aluminum alloy [Volume 23, Issue 3, 2020, Pages 196-205]
Shafi Hosseini, Mehran Non-Isothermal Kinetic Analysis of Oxidation of Mg-0.15Al Alloy Powder [Volume 23, Issue 1, 2020, Pages 16-27]
Shahri, Farzad Evaluation of magnetic and giant magnetoimpedance properties in amorphous Co-based biosensor [Volume 23, Issue 2, 2020, Pages 163-175]
Sheibani, Saeed Optimization and kinetic study of leaching process in recycling of Ga from waste LED [Volume 23, Issue 2, 2020, Pages 118-130]
T
Tadayo saidi, Mehran Application of Response Surface Method to Optimize Thickness and Hardness of Chromium Carbide Coatings Created by Thermo-Reactive Diffusion (TRD) [Volume 23, Issue 3, 2020, Pages 235-244]
Taghiabadi, Reza Simulation of heat transfer in gas tungsten arc welding of stainless steel type 304 [Volume 23, Issue 1, 2020, Pages 74-83]
Taghiabadi, Reza Effect of Si and Fe on thermal modification behavior of Al-4.5Cu-xSi-yFe [Volume 23, Issue 3, 2020, Pages 255-269]
Talaei, Mahdi Fabrication and Investigation of Toxicity of CuFe2O4 Nanoparticles Synthesized by Combustion Sol-Gel Method for Hyperthermia Application [Volume 23, Issue 3, 2020, Pages 220-234]
Talafi Noghani, Mohammad Effect of Si and Fe on thermal modification behavior of Al-4.5Cu-xSi-yFe [Volume 23, Issue 3, 2020, Pages 255-269]
Torabi Parizi, Masoumeh The effect of copper smelting technology on the dissolution of anodes at the Sarcheshmeh copper electrorefining plant [Volume 23, Issue 2, 2020, Pages 90-101]
V
Vali Pour, Zahra Effect of WC content on porosity percentage, microstructure, and mechanical behavior of steel foam manufactured through powder metallurgy using space holder technique [Volume 23, Issue 2, 2020, Pages 142-153]
Y
Yoosefan, Fateme Effect of frequency changes in pulsed deposition process on the composition and morphology of CoCrFeMnNi high entropy alloy coatings [Volume 23, Issue 3, 2020, Pages 245-254]
