[1] D. C. Lagoudas, Shape Memory Alloys: Modeling and Engineering Applications, Springer, USA, 2007, pp. 1-117.
[2] S. K. Vajpai, R. K. Dube, M. Sharma, “Studies on the mechanism of the structural evolution in Cu–Al–Ni elemental powder mixture during high energy ball milling”, Journal of Materials Science, 2009, Vol. 44, pp. 4334-4341.
[3] S. Pourkhorshidi, N. Parvin, M. S. Kenevisi, M. Naeimi, H. Ebrahimnia Khaniki, “A study on the microstructure and properties of Cu-based shape memory alloy produced by hot extrusion of mechanically alloyed powders”, Materials Science and Engineering A, 2012, Vol. 556, pp. 658-663.
[4] M. Sharma, S. K. Vajpai, R. K. Dube, “Processing and characterization of Cu-Al-Ni shape memory alloy strips prepared from elemental powders via a novel powder metallurgy route”, Metallurgical and Materials Transactions A, 2010, Vol. 41, pp. 2905-2913.
[5] ASM metals handbook, Vol. 15, 10th ed., ASM international, USA, 1992, PP. 171-265.
[6] V. Sampath, “Studies on the effect of grain refinement and thermal processing on shape memory characteristics of Cu–Al–Ni alloys”, Smart Materials Structure, 2005, Vol. 14, pp. 253–260.
[7] Z. Xiao, Z. Li, M. Fang, M. Luo, S. Gong, N. Tang, “Structure evolution of Cu-based shape memory powder during mechanical alloying”, Transactions of Nonferrous Metals Society China, 2007, Vol. 17, pp. 1422-1427.
[8] M. Izadinia, K. Dehghani, “Structure and properties of nanostructured Cu-13.2Al-5.1Ni shape memory alloy produced by melt spinning”, Transactions of Nonferrous Metals Society China, 2011, Vol. 21, pp. 2037-2043.
[9] K. Y. Wang, T. D. Shen, “Structural evolutions of NiTi systems caused by mechanical alloying in different atmospheres”, Materials Science and Engineering A, 1994, Vol. 179-180, pp. 215-219.
[10] Darel E. Hodgson, Ming H. Wu, Robert J. Biermann, Shape Memory Application Inc., Memory Technologies, Harrison Alloys, 1999.
[11] T. Minemura, H. Andoh, I. ikuta, “Reversible colour change in Cu-Al-Ni alloy ribbon associated with phase transformation”, Journal of Materials science, 1987, Vol. 22, pp. 932-936.
[12] D. E. Hodgson, M. H. Wu, R. J. Biermann, Shape Memory Alloy, ASM Handbook, 10th ed., Metals Park, Ohio, 1990, Vol. 2, pp. 897-902.
[13] V. Novak, P. Sittner, D. Vokoum , N. Zarubova, “On the anisotropy of martensitic transformations in Cu-based alloys”, Materials Science and Engineering A, 1999, Vol. 273-275, pp. 280-285.
[14] H. H. Kuo, W. H. Wang, Y. F. Hsu, “Microstructural characterization of precipitates in Cu-10Al-0.8Be shape memory alloy”, Materials Science and Engineering A, 2006, Vol. 430, pp. 292-300.
[15] C. Picornel, R. Rapacioli, J. Pons, E. Cesari, “Two way shape memory effect in Cu-Al-Ni single crystal”, Materials Science and Engineering A, 1999, Vol. 273-275, pp.605-609.
[16] S. Montecinos, A. Cuneberti, A. Sepulveded, “Grain size and pseudoelastic behaviour of a Cu-Al-Be alloy”,
Materials Characterization, 2008, Vol. 59, pp. 117-123.
[17] J. Font, E. Cesari, J. Muntasell, J. Pons, “Thermomechanical cycling in Cu-Al-Ni based melt-spun shape memory ribbons”, Materials Science and Engineering A, 2003, Vol. 354, pp. 207-211.
[18] C.Y. Chung, C.W.H. Lam, “Cu-based shape memory alloys with enhanced thermal stability and mechanical properties”, Materials Science and Engineering A, 1999, Vol. 273-275, pp. 622-624.
[19] S.K. Vajpai, R.K. Dube, P. Chatterjee, S. Sangal, “A novel powder metallurgy approach to prepare fine-grained Cu-Al-Ni shape memory alloy strips from elemental”, Metallurgical and Materials Transaction A, 2012, Vol. 43, pp. 2484-2499.
[20] S. M. Tang, C. Y. Chung, W. G. Liu, “Preparation of Cu-Al-Ni based shape memory alloys by mechanical alloying and powder metallurgy method”, Journal of Minerals Processing Technology, 1997, Vol. 63, pp. 307-312.
[21] S.K. Vajpai, R.K. Dube, S. Sangal, “Microstructure and properties of Cu–Al–Ni shape memory alloy strips prepared via hot densification rolling of argon atomized powder preforms”, Materials Science and Engineering A, 2011, Vol. 529, pp. 378-387.
[22] A. Ibarra, P.P. Rodr´ıguez, V. Recarte, J.I. Pérez-Landazábal, M.L. Nó, J. San Juan, “Internal friction behaviour during martensitic transformation in shape memory alloys processed by powder metallurgy”,Materials Science and Engineering A, 2004,Vol. 370, pp. 492-496.
[23] M. Silvaa, S. Lima, “Evaluation of mechanical alloying to obtain Cu-Al-Nb shape memory alloy”, Materials Research, 2005, Vol. 8, No. 2, pp. 169-172.
[24] Z. Li, Z.Y. Pan, N. Tang, Y.B. Jiang, N. Liu, M. Fang, F. Zheng, “Cu–Al–Ni–Mn shape memory alloy processed by mechanical alloying and powder metallurgy”, Materials Science and Engineering A, 2006, Vol. 417, pp. 225-229.
[25] Z. Xiao, Z. Li, M. Fang, S. Xiong, X. Sheng, M. Zhou, “Effect of processing of mechanical alloying and powder metallurgy on microstructure and properties of Cu–Al–Ni–Mn alloy”, Materials Science and Engineering A, 2008, Vol. 488, pp. 266-272.
[26] R. Amini, S.M.M. Mousavizad, H. Abdollahpour, M. Ghaffari, M. Alizadeh, A. K. Okyay, “Structural and microstructural phase evolution during mechano-synthesis of nanocrystalline/amorphous CuAlMn alloy powders”, Advanced Powder Technology, 2013, Vol. 579, pp. 1-6.
[27] A. Ibarra, J. San Juan, E.H. Bocanegra, M.L. No, “Thermo-mechanical characterization of Cu–Al–Ni shape memory alloys elaborated by powder metallurgy”, Materials Science and Engineering A, 2006, Vol. 438–440,pp. 782–786.
[28] U. Sari, “Influences of 2.5 wt% Mn addition on the microstructure and mechanical properties of Cu-Al-Ni shape memory alloys”, International Journal of Minerals, Metallurgy and Materials, 2010, Vol. 17, pp. 192-198.
[29] K. Enami, N. Takimoto, S. Nenno, “Effect of the vanadium addition on the grain size and mechanical properties of the Copper-Aluminium-Zinc shape memory alloys”, Journal de Physique, 1982, Vol. 4, pp. 773-778.
[30] J.S.Lee, C.M.Wayman, “Grain refinement of a Cu-Al-Ni shape memory alloy by Ti and Zr addition”, Transactions of Japan Institute of Metals, 1986, Vol. 27, No. 8, 584-591.
[31] M. A. Morris, “High temperature properties of ductile Cu-Al-Ni shape memory alloys with boron additions”, Acta Metallurgica and Materiala, 1992, Vol. 40, No. 7, pp. 1573-1586.
[32] Y. S. Han, Y. G. Kim, “The effects of boron and aging on mechanical properties and martensitic temperatures in Cu-Zn-Al shape memory”, Scripta Metallurgica, 1987, Vol. 21, pp. 947-952.
[33] S.M.Tuomine, R.J.Biermann, “Shape memory wires”, Journal of Metals, 1988, pp.32-35.
[34] W. S. Yang, D. E. Mikkola, “Ductilization of Ti-Ni-Pd shape memory alloys with boron additions”, Scripta Metallurgica et Materialia, 1993, Vol. 28, pp. 161-165.
[35] Y. Suzuki,Y. Xu, S. Morito, K. Otsuka, K. Mitose, “Effects of boron addition on microstructure and mechanical properties of Ti-Td-Ni high temperature shape memory alloys”, Materials Letters, 1998, Vol. 36, pp. 85-94.
]36[ ا. عطائی، س. شیبانی، غ. خیاطی، س. اسدی کوهنجانی، آلیاژسازی و فعالسازی مکانیکی فناوری تهیه نانومواد، سازمان انتشارات جهاد دانشگاهی شعبه واحد تهران، تهران، 1385، 140-149.
[37] L. Lu, M. O. Lai, Mechanical alloying, Kluwer Academic Publication, Boston, 1998, pp. 15-49.