@article { author = {Sohrabi, Mohammad Javad and Mirzadeh, Hamed}, title = {Microstructural Investigation of Inconel 718 Superalloy in the As-Cast and Homogenized Conditions}, journal = {Metallurgical Engineering}, volume = {22}, number = {4}, pages = {290-295}, year = {2019}, publisher = {Iranian Metallurgical Engineers}, issn = {1563-1745}, eissn = {}, doi = {10.22076/me.2020.112735.1254}, abstract = {The microstructure of Inconel 718 superalloy in the as-cast (vacuum arc remelted and cast in a water-cooled copper mold) and homogenized conditions was studied. Scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) were used for microstructural studies and elemental analysis, respectively. The presence of austenite/Laves eutectic constituent and carbides was discussed based on the phase diagram and the microsegregation of niobium and molybdenum between dendrite arms of the austenite matrix. In the eutectic structure, the amount of Nb was estimated to be ~ 20 wt%, which is much higher than the corresponding value of ~ 5 wt% in the original chemical composition of the alloy. Based on the elemental analysis, the Laves phase and carbides were characterized as Ni2Nb and MC, respectively. The dissolution of the Laves phase and the disappearance of the dendritic structure as a result of the elevated temperatures homogenization were also studied and it was revealed that the carbide particles remain in the microstructure after homogenization.}, keywords = {Superalloys,Microstructure,Microsegregation,Homogenization heat treatment}, title_fa = {بررسی ریزساختار سوپرآلیاژ اینکونل 718 در حالت های ریختگی و همگن سازی شده}, abstract_fa = {ریزساختار سوپرآلیاژ اینکونل 718 در حالت‌های ریخته شده (ذوب مجدد در قوس الکتریکی تحت خلاء و انجماد در قالب مسی آبگرد) و همگن سازی شده مورد تحلیل و بررسی قرار گرفت. جهت مطالعه ریزساختار و تجزیه و‌ تحلیل عنصری، میکروسکوپ الکترونی روبشی و روش طیف سنجی پراکندگی انرژی استفاده شد. حضور ساختار یوتکتیک آستنیت / فاز لاوه و کاربیدها بر اساس نمودار فازی و ریزجدایش عناصر نیوبیوم و مولیبدن بین بازوهای دندریتی زمینه‌ی آستنیتی مورد بحث قرار گرفت. در ساختار یوتکتیکی مقدار عنصر نیوبیوم بر حسب درصد وزنی برابر با 20 تخمین زده شد که بسیار بالاتر از مقدار متناظر آن در ترکیب شیمیایی آلیاژ پایه یعنی 5 می‌باشد. بر اساس تجزیه و تحلیل عنصری، فاز لاوه Ni2Nb و کاربید MC مشخصه‌یابی شدند. همچنین انحلال فاز لاوه و ناپدید شدن ساختار دندریتی به عنوان نتیجه‌ی عملیات همگن ‌سازی دمای بالا بحث شد و مشخص شد که پس از عملیات همگن‌ سازی، با انحلال فاز لاوه و ناپدید شدن ساختار دندریتی، کاربیدها در ریزساختار باقی می مانند.}, keywords_fa = {سوپرآلیاژها,ریزساختار,ریزجدایش,عملیات حرارتی همگن‌سازی}, url = {https://www.metalleng.ir/article_39758.html}, eprint = {https://www.metalleng.ir/article_39758_0c2fdd647309f39b07662a1edd484034.pdf} }