@article { author = {Gholizadeh, Ahmad}, title = {Effect of sintering atmosphere and temperature on mechanical properties of Ni-Cu-Zn ferrite nanoparticles}, journal = {Metallurgical Engineering}, volume = {20}, number = {4}, pages = {304-310}, year = {2017}, publisher = {Iranian Metallurgical Engineers}, issn = {1563-1745}, eissn = {}, doi = {10.22076/me.2018.57049.1118}, abstract = {Ferrites exhibits unique structural, electrical, magnetic and mechanical properties in extreme conditions that are of great research interest. In this work, the effects of sintering atmosphere and temperature on elastic moduli properties of Ni0.3Cu0.2Zn0.5Fe2O4 nanoparticles have been investigated. The elastic constants of the samples have been calculated by using the values of the structural parameters and also the vibration frequencies obtained from infrared spectra. The values of shear (VS) and longitudinal (Vl) wave velocities obtained from force constants have been used to determine the values of Young’s modulus (E), rigidity modulus (G), bulk modulus (B), Debye temperature (θD). By comparison of the elastic results of the studied samples, we can observe that the elastic moduli of the samples sintered under reducing atmosphere are higher than the other samples, whereas they have been improved with increase of sintering temperature under reducing atmosphere. In addition, using the values of the compliance sij obtained from elastic stiffness constants, the values of Young’s modulus E(hkl) and Poisson’s ratio σ(hkl,θ) along the oriented direction [hkl] have been calculated for the samples.}, keywords = {Ni-Cu-Zn ferrite,Citrate -nitrate method,IR spectroscopy,Mechanical properties}, title_fa = {اثر محیط و دمای گرمادهی بر ویژگی‌های مکانیکی نانوذرات فریت نیکل – مس – روی}, abstract_fa = {فریت‌ها به خاطر داشتن ویژگی‌های ساختاری، الکتریکی، مغناطیسی و مکانیکی منحصر بفرد در شرایط فرین موضوع تحفیقاتی بزرگی را در بردارد. در این کار، اثرات دمایی و جو گرمادهی روی ویژگی‌های مدول کشسانی نانوذرات Ni0.3Cu0.2Zn0.5Fe2O4 مورد بررسی قرار می‌گیرد. مقادیر ثابت‌های کشسانی نمونه‌ها با استفاده از مقادیر پارامترهای ساختاری و همچنین فرکانس‌های به-دست آمده از طیف فروسرخ نمونه‌ها محاسبه شدند. مقادیر سرعت‌های امواج طولی(VS) و عرضی (Vl) به‌دست آمده از ثابت‌های نیرو، برای تعیین مقادیر مدول یانگ (E)، مدول سفتی (G)، مدول حجمی (B) و دمای دبای (θD) استفاده شده‌اند. با مقایسه نتایج کشسانی نمونه‌های مورد مطالعه می‌توان فهمید که ویژگی‌های کشسانی نمونه‌ها با گرمادهی در محیط کاهنده بیشترین مقدار را دارد که با افزایش دما این ویژگی‌ها در نمونه‌های گرمادهی شده در محیط اکسنده بهتر می‌شود. همچنین، مقادیر ثابت-های نرمی sij به‌دست آمده از ثابت‌های کشسانی نمونه‌ها در محاسبه مدول یانگ E(hkl) و نسبت پواسون σ(hkl,θ) در امتداد راستاهای بلوری[hkl] استفاده شده است.}, keywords_fa = {فریت نیکل-مس-روی,روش سیترات-نیترات,طیف‌سنجی فروسرخ,ویژگی‌های مکانیکی}, url = {https://www.metalleng.ir/article_33169.html}, eprint = {https://www.metalleng.ir/article_33169_5c4ec600e891f10505dd52c032bd98da.pdf} }