@article { author = {Payandeh, Yousef and Mirzakhani, Bahman}, title = {Study of Phas Transformation and Mechanical Response in NiTi Shape Memory Alloy under Different Thermomechanical Treatment}, journal = {Metallurgical Engineering}, volume = {19}, number = {1}, pages = {42-54}, year = {2016}, publisher = {Iranian Metallurgical Engineers}, issn = {1563-1745}, eissn = {}, doi = {10.22076/me.2017.40894.1060}, abstract = {In this work, the martensitic transformation and mechanical response of a near equiatomic NiTi Shape Memory Alloy (SMA) subjected to different thermo-mechanical treatments has been studied. The NiTi wire in as drawn condition was subjected to seven heat treatment cycles in order to prepare the wires with different transformation characteristics. The transformation temperatures have been measured using DSC method. The wires were then subjected to tensile test at the temperature of 20, 80 and 90 C, in order to study the stress induced martensite. According to the results, with increasing the heat treatment temperature or time, the Ms increases and the Rs decreases in such a way that the R-phase disappears when the temperature achieves to 600 C. The stress at which, the martens tic reorientation takes place is independent of the heat treatment conditions. The stress induced martensite, however, forms under different stresses, depending on the heat treatment temperature and time. These samples show the superelastic effect at high temperature; but in the case of the samples with martensitic reorientation, the alloys are not able to present this effect. Therefore, it is possible to determine the mechanical response of the material with respect to the given applications.}, keywords = {NiTi Shape Memory Alloy,Martensitic transformation,Martensitic reorientation,Twinning,slip}, title_fa = {بررسی تحولات فازی و پاسخ آلیاژ حافظه‌دار NiTi تحت عملیات ترمومکانیکی}, abstract_fa = {در این پژوهش، دگرگونی مارتنزیتی و پاسخ آلیاژ حافظه‌دار NiTi تحت عملیات ترمومکانیکی مختلف مورد مطالعه قرار گرفت. به منظور بررسی تغییر فاز و مقایسه‌ی پاسخ ماده، عملیات حرارتی در دماهای °C 600 - 350 و کوئنچ در آب، به منظور تهیه چند نمونه با مشخصات مختلف تحول، آماده گردید. دماهای استحاله، با استفاده از روش کالری‌متری (DSC) اندازه‌گیری شد. پس از آن، برای تعیین تنشی که در آن تحول رخ می دهد، آزمایش کشش در دمای اتاق و در دو دمای بالاتر از Af انجام گرفت. نتایج بدست آمده نشان می دهد که با افزایش دما و یا زمان عملیات حرارتی، دمای شروع استحاله مارتنزیتی افزایش و دمای شروع و پایان تحول فاز R کاهش می‌یابد؛ به طوری که در دماهای بالاتر فاز R ناپدید می شود. در دمای اتاق تنشی که در آن جهت گیری مجدد مارتنزیتی صورت می گیرد، برای نمونه های مختلف یکسان بوده و ظاهرا در دماها و زمان‌های بیشتر عملیات حرارتی تغییر نمی‌کند. اما در نمونه‌هایی که در آنها تحول مارتنزیتی رخ می‌دهد، تشکیل مارتنزیت ناشی از تنش از فاز R تحت تنش‌های متفاوت اتفاق می‌افتد. این نمونه‌ها در دمای بالا رفتار سوپرالاستیک نشان می‌دهند. در حالی که در نمونه هایی که در 550 درجه و بالاتر عملیات حرارتی شده اند چنین رفتاری دیده نمی شود. بنابراین با تغییر هدفمند شرایط می توان پاسخی متفاوت و متناسب با کاربرد آلیاژ دریافت نمود. این مهم در طراحی محصولات ساخته شده از آلیاژهای حافظه دار مثل محرکه ها بسیار اهمیت دارد.}, keywords_fa = {آلیاژ حافظه‌دار NiTi,تحول مارتنزیتی,جهت گیری مجدد مارتنزیتی,دوقلویی,لغزش}, url = {https://www.metalleng.ir/article_27386.html}, eprint = {https://www.metalleng.ir/article_27386_c82e95e9597bf56fe9237b864b0ee52f.pdf} }