@article { author = {Khayat, milad and Kheirandish, Sh and Abbasi, Majid}, title = {Effect of Pearlitizing on the as cast and as heat-treated Microstructure of Hadfield Steels}, journal = {Metallurgical Engineering}, volume = {19}, number = {1}, pages = {13-21}, year = {2016}, publisher = {Iranian Metallurgical Engineers}, issn = {1563-1745}, eissn = {}, doi = {10.22076/me.2017.29729.1036}, abstract = {In this paper, the effects of pearlitizing on the as cast and as heat-treated microstructures of austenitic manganese steel (named Hadfield steel) were evaluated. The samples with different contents of carbon and manganese were produced using induction furnace and precision casting method. The as-cast, annealed, and solution treated microstructural studies were performed by optical microscopy, X-ray diffraction, ferritescopy and field emission scanning electron microscopy. The microstructural results showed that the as cast and annealed microstructures of the steel in room temperature consist of austenite matrix, carbide and ferrite. Fine examination by scanning electron microscope shows that the ferrite and carbide phases are formed as pearlitic colonies. It was also observed that the increase in carbon content and annealing heat treatment are more facilitated the pearlitizing. By applying the final heat treatment (solution and quenching in water), pearlite colonies convert to new fine austenite grains and then the austenite grains sizes are decreased.}, keywords = {Hadfield Steel؛ Pearlitizing,Grain size,Heat treatment}, title_fa = {اثر پرلیت‌زایی بر ریزساختار ریختگی و عملیات حرارتی شده فولاد هادفیلد}, abstract_fa = {در این مقاله، اثر پرلیت‌زایی بر ریزساختار ریختگی و عملیات حرارتی شده فولاد آستنیتی منگنزی موسوم به هادفیلد بررسی شد. نمونه‌های با مقادیر مختلف کربن و منگنز با استفاده از کوره القایی آزمایشگاهی و به روش ریخته‌گری دقیق تولید شدند. مطالعات ریزساختاری در شرایط ریختگی، آنیل شده و عملیات محلولی و تندسرمایی شده در آب به وسیله میکروسکپ نوری، پراش اشعه ایکس، فریت‌سنجی و میکروسکپ الکترونی روبشی گسیل میدان، مورد بررسی قرار گرفت. نتایج مطالعات میکروسکپی نشان داد که ریزساختار ریختگی و آنیل شده این فولاد در دمای محیط شامل زمینه آستنیتی به همراه کاربید و فریت در مرز یا به طور جزیی در درون دانه‌های آستنیت است. بررسی‌های دقیق میکروسکپ الکترونی روبشی نشان داد که فازهای فریت و کاربید در اغلب موارد به صورت کلونی‌های پرلیتی تشکیل می‌شود. همچنین مشاهده شد که افزایش مقدار کربن و انجام عملیات حرارتی آنیل، پرلیت‌زایی را بیشتر تسهیل می‌کند. با انجام عملیات حرارتی نهایی انحلالی و تندسرمایی در آب، کلونی‌های پرلیت به دانه‌های آستنیت جدید و فرعی تبدیل شده و از این طریق می‌توانند سبب ریزتر شدن دانه‌های آستنیت شوند.}, keywords_fa = {فولاد هادفیلد,پرلیت‌زایی,اندازه دانه‌,عملیات حرارتی}, url = {https://www.metalleng.ir/article_27383.html}, eprint = {https://www.metalleng.ir/article_27383_34d4817e6774914b72b811a24968e78b.pdf} }