@article { author = {Hadi, Morteza and Mohammad Sharifi, Ehsan and Samei, Mohammad}, title = {Investigation of 60SPb20 steel flow stress changes in high-temperature compression tests}, journal = {Metallurgical Engineering}, volume = {24}, number = {3}, pages = {182-194}, year = {2021}, publisher = {Iranian Metallurgical Engineers}, issn = {1563-1745}, eissn = {}, doi = {10.22076/me.2022.538371.1332}, abstract = {The aim of this study was to investigate the behavior of 60SPb20 free-cutting steel at high-temperature compression tests and to find the relationships of flow stress with strain rate and temperature based on the Arrhenius model. For this purpose, compression tests were performed on standard samples of the alloy in the temperature range of 800 to 1050 °C and at a strain rate of 0.001 to 1 s-1. In addition to the use of high-temperature lubricant, the effect of friction on flow stress was eliminated by a modification model and obtained flow curves were applied for further calculations. The compression curves and microstructural studies showed that the dynamic recrystallization mechanism was responsible for softening of the alloys at high temperatures. Moreover, the constitutive equations of hot deformation were determined using the Zener-Hollomon parameter for this steel. The results of changing the flow stress versus temperature at different strain rates showed that the activation energy of hot deformation of 60SPb20 free-cutting steel was about 434 kJ/mol. The difference between this value and values of other steels such as low and medium carbon steels, tool steels, etc. was discussed. Finally, after calculating the required constants for the alloy, the relation of flow stress versus the Zener-Hollomon parameter was determined which can be used to predict hot deformation behavior at higher strain rates.}, keywords = {60SPb20 Free-cutting steel,Hot deformation behavior,Zener-Hollomon parameter,Dynamic recrystallization}, title_fa = {بررسی تغییرات تنش سیلان فولاد 60SPb20 در آزمایش فشار دمای بالا}, abstract_fa = {هدف از این پژوهش مطالعه بررسی رفتار کارداغ فولاد خوش‌تراش 60SPb20 در شرایط آزمایش فشاری دمای بالا و یافتن روابط کمی تنش سیلان با پارامترهایی مثل نرخ کرنش و دما بر پایه مدل آرنیوسی است. بدین منظور آزمایش‌های فشار روی نمونه‌های استاندارد از آلیاژ، در بازه دمایی 800 تا oC 1050 و در نرخ کرنش ۰۰۱/۰ تا s-1 ۱ انجام شد. در آزمایشات فشار ضمن استفاده از روانکار دمای بالا، اثر اصطکاک بر تنش سیلان به کمک مدل اصلاحی حذف و منحنی‌های سیلان بدست آمده برای محاسبات مورد استفاده قرار گرفت. نتایج بدست آمده از منحنی‌های حاصل از آزمایش فشار داغ و بررسی‌های ریزساختاری نشان داد مکانیزم تبلور مجدد دینامیک باعث رخ دادن پدیده نرم شدن در دمای های بالا برای این فولاد است. در ضمن معادلات بنیادین فشار داغ با استفاده از پارامتر زنر- هولمن برای این فولاد تعیین شد. نتایج تغییرات تنش سیلان بر حسب دما در نرخ کرنشهای مختلف نشان داد انرژی فعال‌سازی تغییر شکل داغ برای فولاد خوش‌تراش 60SPb20، حدود kJ/mol 434 است. تفاوت بین این مقدار بدست آمده با فولادهای دیگری همچون فولاهای کم کربن و کربن متوسط و فولادهای ابزار و غیره تحلیل شد. نهایتا با محاسبه ثوابت لازم برای آلیاژ مذکور، رابطه تنش سیلان با پارامتر زنر- هولمن که برای پیش‌بینی رفتار تغییر شکل داغ در نرخ کرنش‌های بالاتر مورد استفاده است، تعیین شد.}, keywords_fa = {فولاد خوش تراش 60SPb20,رفتار فشار داغ,پارامتر زنر- هولمن,تبلور مجدد دینامیکی}, url = {https://www.metalleng.ir/article_253211.html}, eprint = {https://www.metalleng.ir/article_253211_25c8970070ed29f9abf3d12e6c02e28a.pdf} }