@article { author = {Farjam Hajiagha, Khadijeh and Akbari, Alireza and mohammadzadeh, Roghayeh}, title = {Cr-rich precipitates impact on microstructure and mechanical properties of Fe-23Cr-2.4Mo ferritic stainless steel}, journal = {Metallurgical Engineering}, volume = {17}, number = {53}, pages = {9-16}, year = {2014}, publisher = {Iranian Metallurgical Engineers}, issn = {1563-1745}, eissn = {}, doi = {}, abstract = {In this study, Influence of formation of Cr-rich precipitates on microstructure and mechanical properties of Fe-23­Cr-2.4­Mo ferritic stainless steel has been investigated. In this regard, samples of this steel were homogenized at 1100°C for 48 hours and then were cooled in furnace. Microstructure, phase composition, and hardness of the samples were investigated using optical and scanning electron microscopes, X-ray diffraction and micro-hardness measurements. Results of microstructural observations and thermodynamic evaluations showed that Cr-rich precipitates are formed in the steel microstructure due to slow cooling after homogenizing treatment. In order to dissolve the Cr-rich precipitates; formed during slow cooling, a number of samples were subjected to solution treatments at 1100°C, 1150°C for 5 hours and then were quenched in water. Results showed that at temperature of 1100°C precipitates are not dissolved entirely but at 1150°C they are dissolved completely. After solution treatment at 1150°C followed by water quenching no longer precipitation is took place due to the fast cooling rate. Results of phase analysis and microhardness measurements showed that solution treatment at 1150°C lead to increase of ferrite lattice parameter from 2.880 Åto 2.893Å and also enhancement hardness from 211 to 317 Vickers despite an increase in ferrite grain size. These results confirm dissolution of Cr-rich precipitates in the ferrite matrix.}, keywords = {Ferritic stainless steel,Cr-rich precipitates,Lattice parameter,Hardness,Grain size}, title_fa = {تأثیر رسوب‌های غنی از کروم بر ریزساختار و خواص مکانیکی فولاد زنگ‌نزن فریتیFe-23Cr-2.4Mo}, abstract_fa = {در تحقیق حاضر تأثیر رسوب‌های غنی از کروم بر ریزساختار و خواص مکانیکی فولاد زنگ‌نزن فریتی Fe-23‌Cr-2‌.4Mo مورد بررسی قرار گرفته است. برای این منظور نمونه‌های تهیه شده از این فولاد تحت عملیات همگن‌سازی در دمای C˚1100 به مدت زمان 48 ساعت قرار گرفتند و پس از اتمام عملیات همگن‌سازی در کوره سرد شدند. نتایج بررسی‌های ریزساختاری و ترمودینامیکی نشان داد که به علت پایین بودن سرعت سرمایش پس از عملیات همگن‌سازی رسوب‌های غنی از کروم در ساختار فولاد تشکیل می‌شوند. برای انحلال رسوب‌های تشکیل شده، تعدادی از نمونه‌های فوق تحت عملیات محلولی در دماهای C˚1100 و C˚1150 به مدت زمان 5 ساعت قرار گرفتند و سپس در آب سرد شدند. نتایج بررسی‌ها نشان داد که بعد از عملیات آنیل محلولی در دمای C˚1100 همه رسوب‌های تشکیل شده حل نمی‌شوند ولی در دمای C˚1150 تمامی رسوب‌ها در زمینه فریتی حل شده و به علت بالا بودن سرعت سرمایش پس از عملیات محلولی این رسوب‌ها دیگر تشکیل نمی‌شوند. نتایج حاصل از بررسی‌های فازی و ریزسختی سنجی نشان داد که انجام عملیات محلولی در دمای C˚1150 باعث افزایش پارامتر شبکه فاز فریت از Å880/2 به Å893/2 و همچنین افزایش سختی آن از 211 به 317 ویکرز علی‌رغم افزایش اندازه دانه می‌شود. این نتایج انحلال رسوب‌ها در زمینه فریتی را تأیید می‌کند.}, keywords_fa = {فولاد زنگ‌نزن فریتی,رسوب‌های غنی از کروم,پارامتر شبکه,سختی,اندازه دانه}, url = {https://www.metalleng.ir/article_18216.html}, eprint = {https://www.metalleng.ir/article_18216_3bb44235a19823c9c477056b17cfd56a.pdf} }