@article { author = {Tondpour, S.Jvad and Salehi, Mahdi and Salimi Jazi, Hamidreza and Ashrafi, Ali}, title = {Effect of cladding powder composition on simultaneous synthesis of Cr and Mo and microstructure of the clads obtained on 304SS using GTAW process}, journal = {Metallurgical Engineering}, volume = {17}, number = {54}, pages = {10-17}, year = {2014}, publisher = {Iranian Metallurgical Engineers}, issn = {1563-1745}, eissn = {}, doi = {}, abstract = {In the present study, the effect of addition of potassium permanganate on the cladding microstructure obtained from the simultaneous synthesis of chromium from chromium oxide and molybdenum from molybdenum trioxide, were studied. For this purpose, a paste of blended powders containing chromium oxide, molybdenum trioxide, nickel, urea and aluminum with various amounts of potassium permanganate was applied on the surface of AISI 304 stainless steel substrates and welded using GTAW process. Cross section of the cladded samples have been investigated using optical microscopy and scanning electron microscopy (SEM) equipped with energy dispersive spectroscopy (EDS). The results revealed that the morphology of the claddings in the center of the weld is lathy ferritic in austenite matrix and in the interface of the substrate and cladding, the morphology was changed to skeletal ferritic. By increasing potassium permanganate in the cladding powders, the final microstructure of the cladding has been finer and the amount of ferrite in the weld metal has been increased. Furthermore, the results showed that the addition of potassium permanganate to the cladding powders would result in increasing the chromium content and subsequently decreasing the molybdenum content of the weld pool, without any significant changes in the manganese content of it.}, keywords = {Synthesis,Cladding,molybdenum,Chromium,304 stainless steel,GTAW}, title_fa = {تاثیر ترکیب لایه پیش نشانی بر سنتز همزمان کروم و مولیبدن و ریزساختار روکش ایجاد شده بر روی فولاد زنگ نزن 304 به روش GTAW}, abstract_fa = {در تحقیق حاضر، تاثیر افزودن پرمنگنات پتاسیم بر ریزساختار روکش حاصل از سنتز همزمان مولیبدن از تری اکسید مولیبدن و کروم از اکسید کروم، مورد بررسی قرار گرفت. بدین منظور ابتدا خمیری از مخلوط پودر پیش نشست حاوی اکسید کروم، تری اکسید مولیبدن، نیکل، اوره و آلومینیوم به همراه مقادیر مختلفی از پرمنگنات پتاسیم بر سطح زیرلایه فولاد زنگ نزن AISI 304 اعمال شد و سپس توسط فرایند جوشکاری قوسی تنگستن- گاز خنثی (GTAW) تحت گاز محافظ آرگون، ذوب سطحی گردید. سطح مقطع نمونه‌های روکش داده شده توسط میکروسکوپ نوری و میکروسکوپ الکترونی روبشی (SEM) مجهز به طیف سنجی انرژی (EDS) مورد بررسی قرار گرفت. نتایج نشان داد که مورفولوژی ساختار روکش‌ها در مرکز جوش به صورت فریت شبکه‌ای در زمینه آستنیتی بوده و در فصل مشترک با زیرلایه، مورفولوژی به فریت اسکلتی تغییر کرده است. همچنین با افزایش میزان پرمنگنات پتاسیم در پودر روکش داده شده، ریز ساختار نهایی روکش‌ها ریزتر شده و میزان فاز فریت در فلز جوش نیز افزایش یافته است. علاوه بر این، نتایج نشان داد که افزودن پرمنگنات پتاسیم به پودر روکش داده شده، موجب افزایش میزان کروم و کاهش میزان مولیبدن در حوضچه جوش گردید، بدون آنکه میزان منگنز در حوضچه جوش تغییر محسوسی داشته باشد.}, keywords_fa = {سنتز,روکش‌کاری,مولیبدن,کروم,فولاد زنگ نزن 304,GTAW}, url = {https://www.metalleng.ir/article_18209.html}, eprint = {https://www.metalleng.ir/article_18209_ccf15c0cbda3093a66312e66d10ad220.pdf} }